Dayton
Dayton 3/8 in 7x19 Galvanized Steel Cable 250 ft WLL 2,880 lb
3/8-inch galvanized steel cable, 7x19 construction, 250 ft length, 2,880 lb working load limit, 14,400 lbf breaking strength
- 2,880 lb working load limit for heavy lifting
- 14,400 lbf breaking strength adds safety margin
- 7x19 strand construction stays flexible under load
- 250 ft continuous length reduces splice points
- Galvanized steel resists corrosion in outdoor use
3/8 in 7x19 Galvanized Steel Cable 250 ft
This galvanized steel wire rope is built for lifting and pulling tasks where a 2,880 lb working load limit is required. The 7x19 strand construction provides flexibility for reeving through blocks or sheaves. It arrives on a 250 ft reel with plain ends ready for termination.
Suited for rigging, winching
The plain, unlubricated ends mean you must add your own fittings such as thimbles, clips or sockets before use. Buyers who need a cable with pre-attached hooks, loops or swaged terminals should look at a different product. The rope is not rated for overhead lifting of personnel.
Working load limit 2,880 lb
This single figure defines the maximum load the cable should carry in normal service. The breaking strength is 14,400 lbf, giving a 5:1 design factor. Do not exceed the working load limit, and inspect the rope regularly for wear, corrosion or distortion.
Highlights
- 2,880 lb working load limit for heavy lifting
- 14,400 lbf breaking strength adds safety margin
- 7x19 strand construction stays flexible under load
- 250 ft continuous length reduces splice points
- Galvanized steel resists corrosion in outdoor use
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What is the working load limit of this 3/8 inch galvanized steel cable?
The working load limit is 2,880 lb for this 7x19 construction cable.
How much heat or noise does this cable produce during continuous lifting operations?
This galvanized steel cable operates silently and generates no heat during lifting or pulling tasks.
What end fittings or hardware are required to use this plain-end cable for lifting?
The cable has plain ends, so you must supply your own thimbles, clips, or swaged fittings to create secure lifting attachments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
