Dayton
Dayton 3/8 in 100 ft 7x19 Steel Cable 2880 lb WLL
Galvanised steel cable, 100 ft long, 3/8 in diameter, 7×19 construction, 2,880 lb working load limit, vinyl coated
- 7 x 19 strand construction delivers flexible handling
- 2,880 lb working load limit supports heavy lifts
- 14,400 lbf breaking strength provides high safety margin
- 100 ft length covers long-distance rigging needs
- Galvanised steel with vinyl coating resists corrosion
3/8 in 100 ft 7x19 Steel Cable
This galvanised steel wire rope measures 3/8 inch in cable diameter and 15/32 inch overall with a vinyl coating. The 7 x 19 strand construction provides flexibility for lifting and pulling tasks. It is supplied in a 100 ft length with plain ends and an unlubricated finish.
Replaces worn or undersized lifting lines
Upgrading to this rope is worthwhile when the existing line shows corrosion, kinking or a lower working load limit. The 2,880 lb working load limit and 14,400 lbf breaking strength suit heavier loads than lighter-duty cables. Buyers who need a higher working load limit or a longer continuous length should verify specifications before purchase.
Vinyl-coated IWRC construction limits
The independent wire rope core and vinyl coating add durability yet the rope remains unlubricated, so regular inspection for wear is essential. Plain ends require proper termination before use. California Proposition 65 warnings apply for cancer and reproductive harm. Users needing a smaller bend radius or a lubricated rope should consider alternative constructions.
Highlights
- 7 x 19 strand construction delivers flexible handling
- 2,880 lb working load limit supports heavy lifts
- 14,400 lbf breaking strength provides high safety margin
- 100 ft length covers long-distance rigging needs
- Galvanised steel with vinyl coating resists corrosion
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What diameter sheave or pulley is required for the 3/8 in cable?
The overall diameter is 15/32 in, so select a sheave groove that matches this size to prevent pinching the vinyl coating.
How do I cut and terminate the 100 ft length without the strands unlaying?
Wrap the cut area tightly with seizing wire, cut through the centre of the seizing, then apply a 3/8 in wire-rope clip or thimble to each end.
When should the vinyl-coated 7x19 cable be replaced?
Replace it if you see broken wires in any 7x19 strand, kinks that will not straighten, crushed sections, or vinyl coating worn through to the galvanized steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
