We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver vinyl-coated galvanized steel cable on a reel, 500 ft long

Dayton

Dayton 3/32 in. 500 ft. 7 x 7 Vinyl Coated Cable

SKU CH-165W-57B7Z

Vinyl-coated galvanised steel cable, 500 ft length with 96 lb working load limit and 480 lbf breaking strength

  • TypeWheelbarrows & Carts
  • Vinyl coating protects the galvanized steel core from corrosion
  • 7 x 7 strand construction gives flexibility for lifting and rigging
  • 96 lb working load limit supports light-duty hoisting tasks
  • 480 lbf breaking strength provides a 5-to-1 safety margin
  • 500 ft continuous length reduces splices on long runs

Cable specifications

This Dayton vinyl coated cable has a 3/32 inch overall diameter and a 1/16 inch cable diameter. It uses a 7 x 7 strand construction with a galvanised steel wire rope and an IWRC core. The reel provides 500 feet of silver coloured cable.

Working load and upgrades

The working load limit is 96 pounds and the breaking strength is 480 pounds force. This cable replaces thinner or uncoated lines where higher abrasion resistance is needed. The jump is worth it when lifting loads near the 96 pound limit or when vinyl protection extends service life in outdoor conditions.

Setup checks

Verify the 3/32 inch overall diameter fits your pulleys, winches or guides. Confirm the 96 pound working load limit matches the intended lifting task. Note the product contains chemicals listed under California Proposition 65 for cancer and reproductive harm.

Highlights

  • Vinyl coating protects the galvanized steel core from corrosion
  • 7 x 7 strand construction gives flexibility for lifting and rigging
  • 96 lb working load limit supports light-duty hoisting tasks
  • 480 lbf breaking strength provides a 5-to-1 safety margin
  • 500 ft continuous length reduces splices on long runs

Specifications

BrandDAYTON
TypeWheelbarrows & Carts

Questions about this item

What diameter hole or fitting does the 3/32 in. overall diameter cable need?

The cable has a 3/32 in. overall diameter with vinyl coating over a 1/16 in. galvanised steel core, so size any pulley, fairlead or clamp for the 3/32 in. outer dimension.

How do I terminate the plain ends on this 7 x 7 vinyl coated cable, and what mistake should I avoid?

Use 1/16 in. wire rope clips or swage sleeves matched to the steel core; do not size fittings to the 3/32 in. vinyl jacket or the connection will slip under the 96 lb working load limit.

When should I replace this 500 ft. vinyl coated galvanised cable?

Inspect regularly and replace if the vinyl coating is cracked, the galvanised steel shows corrosion, or any broken wires appear in the 7 x 7 strands, as these reduce the 480 lbf breaking strength.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.