Dayton
Dayton 3/16 in Stainless Steel Cable 50 ft WLL 940 lb
304 stainless steel cable with 1 x 19 strand construction, 50 ft length and 940 lb working load limit
- 304 stainless steel resists corrosion in harsh environments
- 940 lb working load limit handles heavy lifting tasks
- 4,700 lbf breaking strength provides a high safety margin
- 50 ft length covers long runs without splicing
- 1 x 19 strand construction keeps the cable flexible and strong
Stainless Steel Cable 50 ft
This 50-foot Dayton cable is made from 304 stainless steel with a 1 x 19 strand construction. It has a working load limit of 940 lb and a breaking strength of 4,700 lbf. The plain ends are unlubricated and uncoated.
Rigging and Lifting Use
Suitable for lifting, pulling and conveying tasks that require corrosion-resistant wire rope. Not intended for applications needing a rated bend radius, swaged terminations or a lubricated finish. Buyers who need different end fittings or a coated surface should look at other products.
3/16 in Diameter with 940 lb WLL
The 3/16 inch diameter and 940 lb working load limit determine whether this cable matches the load and hardware requirements. Verify the limit against the intended load and connection method before purchase. California Proposition 65 warnings apply.
Highlights
- 304 stainless steel resists corrosion in harsh environments
- 940 lb working load limit handles heavy lifting tasks
- 4,700 lbf breaking strength provides a high safety margin
- 50 ft length covers long runs without splicing
- 1 x 19 strand construction keeps the cable flexible and strong
Specifications
| Brand | Dayton |
|---|
Questions about this item
Does the 304 stainless steel cable generate heat or noise when used continuously under its 940 lb working load limit?
The 304 stainless steel wire rope is a passive mechanical component with no moving parts, motor or electronics, so it produces no heat or noise during operation regardless of load duration.
What fittings or terminations must I already have to attach this plain-end 3/16 in cable for lifting?
The cable ends are plain with no loops or hardware; you must supply compatible 3/16 in wire-rope clips, thimbles, swage sleeves or sockets rated for at least the 940 lb working load limit.
Will the 1 x 19 strand construction and IWRC core work with older galvanised or fibre-core sheaves I already own?
The unlubricated 304 stainless 1 x 19 construction with IWRC core is stiffer than fibre-core ropes; ensure existing sheave grooves match the 3/16 in diameter and are smooth to avoid accelerated wear on both rope and sheave.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
