We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze centrifugal pump with TEFC motor housing

Dayton

Dayton 2ZXP9 Centrifugal Pump 3/4 hp 115/230V 50 ft Head

SKU CH-WQJC-E3G67 MPN 2ZXP9

A 3/4 hp single-phase centrifugal pump with bronze housing delivers up to 65 gpm at 5 ft of head and 24 gpm at 40 ft, reaching a maximum 50 ft head on 115/230 V AC

  • TypeDrain Components
  • Delivers up to 65 gpm at 5 ft head for rapid drainage
  • Maintains 24 gpm at 40 ft head for consistent high-lift performance
  • Reaches 50 ft maximum head to handle tall vertical runs
  • Runs on 115/230V single-phase power for flexible site wiring
  • Bronze housing with TEFC motor resists corrosion and extends service life

Centrifugal Pump 3/4 hp 115/230V

The Dayton 2ZXP9 is a single-phase centrifugal pump rated at 3/4 horsepower and nameplate voltage 115/230V AC. It has a bronze pump housing and a totally enclosed fan-cooled motor. Compatible intake and discharge pipe sizes are 1 1/2 inch NPT. Maximum head is 50 feet.

Suited for residential drainage

This pump suits installations that require up to 50 feet of head and flow rates between 24 and 65 gallons per minute depending on head. It is not for buyers who need higher head pressure or larger pipe connections. It is also not for applications requiring three-phase power or a different voltage range.

50 ft maximum head decides fit

The single specification that determines whether this is the right part is the 50 feet maximum head. At 40 feet of head the flow rate is 24 gpm; at 10 feet it is 61 gpm; at 5 feet it is 65 gpm. If the system demands more than 50 feet of head, this pump will not meet the requirement.

Highlights

  • Delivers up to 65 gpm at 5 ft head for rapid drainage
  • Maintains 24 gpm at 40 ft head for consistent high-lift performance
  • Reaches 50 ft maximum head to handle tall vertical runs
  • Runs on 115/230V single-phase power for flexible site wiring
  • Bronze housing with TEFC motor resists corrosion and extends service life

Specifications

TypeDrain Components
BrandDayton
Model2ZXP9

Questions about this item

Will the 1 1/2 in NPT connections on this 3/4 hp pump match the fittings on my existing drain lines?

The pump uses 1 1/2 in NPT threads on both intake and discharge, so it will connect directly to standard 1 1/2 in NPT drain piping without adapters.

How can I confirm the 3/4 hp motor is delivering the rated performance after installation?

Measure the flow at a known head — 65 gpm at 5 ft, 61 gpm at 10 ft, 57 gpm at 15 ft, or 24 gpm at 40 ft — and compare with the published curve.

Does the box include the 115/230 V wiring harness or must I supply my own cord and starter?

The pump ships as the bare unit with bronze housing and TEFC motor; power cord, pressure switch and any required starter components are purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.