We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 2MYT1 coolant filter trap, metal cylinder with mesh screen

Dayton

Dayton 2MYT1 Coolant Filter Trap 30 Mesh 590 micron 100 gpm

SKU CH-MNV3-0QJAE MPN 2MYT1

A coolant filter trap with a 30 mesh screen rated to 590 micron and a 100 gpm maximum flow rate for machine coolant pumps

  • TypeDrain Components
  • Removes fine particles with 590 micron mesh filtration
  • Supports high-volume systems at 100 gpm flow rate
  • 30 mesh screen traps debris before pump damage
  • Compatible with Dayton and Graymills coolant pumps
  • Fits multiple Grainger pump part numbers for easy replacement

Industrial Coolant Filtration

The Dayton 2MYT1 is a 30 mesh coolant filter trap designed for machine coolant pumps. It fits directly onto compatible Dayton and Graymills pump models including Grainger part numbers 1XLK8, 3GRU6 through 3GRU9, and 3GRV1 through 3GRW3. Maintenance teams use it to capture debris before fluid recirculates.

Flow Capacity and Filtration

The unit handles a maximum flow rate of 100 gpm with a 590 micron filter rating. This specification allows high-volume coolant circulation while trapping particles at the rated mesh size. Compatible pump series 56YR40 through 56YR47 install without modification.

Sustained Operation Characteristics

Under continuous pump cycles the trap maintains consistent filtration without pressure drop spikes. The aluminum construction resists coolant chemistry over long shifts. Shops running multi-pump lines standardise on this model for predictable uptime.

Highlights

  • Removes fine particles with 590 micron mesh filtration
  • Supports high-volume systems at 100 gpm flow rate
  • 30 mesh screen traps debris before pump damage
  • Compatible with Dayton and Graymills coolant pumps
  • Fits multiple Grainger pump part numbers for easy replacement

Specifications

TypeDrain Components
BrandDayton
Model2MYT1

Questions about this item

How do I install the 2MYT1 filter trap in my coolant line and what step is often missed?

Thread the unit into the return line after the pump, matching the 30 mesh screen orientation arrow; the step often missed is flushing the line first so debris does not clog the 590 micron rating on start-up.

What maintenance will the 30 mesh screen need and how often should I plan to replace it?

Remove the screen weekly and back-flush with clean coolant; replace the element when flow drops below the 100 gpm rating or the mesh shows permanent deformation.

At what point does the 590 micron filter become the limiting factor during continuous operation?

The trap reaches its limit when suspended solids load reduces effective flow under the 100 gpm maximum, typically signalled by a rising pressure differential across the housing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.