Dayton
Dayton 2HAC7 Recessed Electric Wall-Mount Heater Bronze
Recessed or surface-mount electric wall heater delivers 1500 or 2000 watts at 208/240 V AC with a bronze steel grille
- ColorBronze
- Delivers up to 2000 W for strong room heating
- Operates on 208/240 V AC single-phase power
- Mounts recessed or surface to suit installation needs
- Steel grille in bronze finish resists wear and matches décor
- 79 °F temperature rise provides rapid comfort
Recessed or Surface Wall Heater
The Dayton 2HAC7 is an architectural electric heater designed for wall installation in commercial or residential spaces. It operates on single-phase 208/240 V AC at 60 Hz and delivers 1500/2000 watts with a 79-degree Fahrenheit air temperature rise.
Steel Grille and Dual Mounting
A steel grille measuring 10 3/4 inches wide by 12 1/8 inches high covers the unit. The housing fits a wall opening of 9-3/16 inches wide by 11 inches high by 3-3/4 inches deep, allowing either recessed or surface mounting to suit the wall structure.
Replaces Baseboard or Portable Units
This heater upgrades from baseboard convectors or portable plug-in heaters where permanent, hard-wired warmth is preferred. The jump is worth it when a finished bronze grille and flush or surface mounting better match the room aesthetics.
Highlights
- Delivers up to 2000 W for strong room heating
- Operates on 208/240 V AC single-phase power
- Mounts recessed or surface to suit installation needs
- Steel grille in bronze finish resists wear and matches décor
- 79 °F temperature rise provides rapid comfort
Specifications
| Brand | DAYTON |
|---|---|
| Color | Bronze |
Questions about this item
What voltage and amperage does the 2HAC7 heater require?
It runs on 208/240 V AC single-phase and draws 7.2 amps at 208 V or 8.3 amps at 240 V.
What wall opening dimensions are needed for recessed mounting?
The rough opening must be 9-3/16 in. wide, 11 in. high and 3-3/4 in. deep.
How is the heater secured during installation, and what step is often missed?
Mount the housing into the opening using the integral brackets, then attach the steel grille; the step often missed is verifying the housing sits flush before fastening the grille.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
