We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel solenoid valve body, quarter inch NPT, two way normally closed

Dayton

Dayton 2A195 1/4 in Stainless Steel Solenoid Valve Trap

SKU CH-ETVZ-BXD6E MPN 2A195

A normally-closed stainless steel solenoid valve body with a 1/4 in port, .34 Cv flow and 150 psi pressure rating for water or air up to 180 °F

  • TypeDrain Components
  • Stainless steel body resists corrosion in harsh environments
  • Normally closed design stops flow until energised for safety
  • 1/4 in pipe size fits standard plumbing connections
  • Operates up to 150 psi with air or water
  • Handles fluid temperatures up to 180 Degrees F

Valve Body for 1/4 in Piping

The Dayton 2A195 is a two-way, normally-closed solenoid valve body machined from stainless steel for 1/4 in nominal pipe connections. It handles air, inert gas or water at pressures up to 150 psi and fluid temperatures to 180 Degrees F. The body carries a .34 Cv rating through a 1/8 in orifice and is rated for corrosive, indoor and outdoor environments.

Suits Direct-Acting Control Loops

Installers building or servicing direct-acting shut-off circuits for clean fluids will find the pressure and temperature range appropriate. The valve requires a separate coil to operate and is not intended for pilot-operated or high-flow applications. Buyers who need an integrated coil assembly or larger flow capacity should look at other configurations.

Threaded Body Mounts In-Line

The 1/4 in threaded ports allow straight in-line installation into existing pipework without special tools. Because the coil is sold separately, the most common issue is selecting a coil with the wrong voltage, wattage or enclosure rating for the intended environment. Verify coil specifications against the valve body before wiring.

Highlights

  • Stainless steel body resists corrosion in harsh environments
  • Normally closed design stops flow until energised for safety
  • 1/4 in pipe size fits standard plumbing connections
  • Operates up to 150 psi with air or water
  • Handles fluid temperatures up to 180 Degrees F

Specifications

TypeDrain Components
BrandDayton
Model2A195

Questions about this item

What coil voltage and type must I already have to operate this normally closed 1/4 in stainless steel valve body?

This valve body is sold less coil, so you need a compatible Dayton coil that matches your supply voltage and the 1/4 in port configuration to actuate the normally closed mechanism.

Will the 150 psi maximum pressure differential for air and water suit my existing low-pressure pneumatic lines?

Yes, the valve handles up to 150 psi differential for both air and inert gas as well as water, with a minimum of 0 psi, making it suitable for typical low-pressure pneumatic systems.

How can I confirm the valve is opening correctly after wiring the coil?

When the coil is energised, the normally closed valve should open; verify flow through the 1/8 in orifice and listen for the solenoid click, ensuring operation stays within the 180 °F fluid temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.