We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical sintered iron hub, 3/4 inch bore, keyway and set screw visible

Dayton

Dayton 29HY58 Jaw Coupling Hub L110 Sintered Iron 3/4 in Bore

SKU CH-R10N-GWDM6

Connects shafts with a sintered iron L110 hub featuring a 3/4 in bore, keyway, and set screw locking for up to 5,000 RPM

  • Sintered iron hub handles up to 5,000 RPM for reliable high-speed power transmission
  • L110 coupling size with 3/4 in bore and keyway fits standard inch shafts directly
  • Set-screw locking secures the hub without additional clamping hardware
  • Horsepower ratings of 1.3 to 3.6 hp at 100 RPM cover Buna-N, urethane and Hytrel spiders
  • Straight jaw profile ensures simple alignment and easy spider replacement

Jaw Coupling Hub L110 3/4 in Bore

This Dayton jaw coupling hub fits a 3/4 inch round bore with a standard keyway for inch-series shaft connections. It is designed for power-transmission assemblies that use an L110 spider element to join two shafts while accommodating slight misalignment.

Set Screw Locking Straight Jaw Profile

The hub uses a set-screw locking method on a straight jaw profile, so installation requires only common hand tools and proper key alignment in the 3/16 inch wide by 3/32 inch deep keyway. Misaligned key seating or over-tightened set screws are the most common causes of vibration or premature spider wear.

Sintered Iron 5000 RPM Limit

Sintered iron construction limits the hub to a maximum speed of 5 000 RPM and transmits up to 1.3 hp at 100 RPM with a Buna-N spider, 2.0 hp with urethane, or 3.6 hp with Hytrel. Builders needing higher speeds or torque capacities must select a larger coupling size or different hub material.

Highlights

  • Sintered iron hub handles up to 5,000 RPM for reliable high-speed power transmission
  • L110 coupling size with 3/4 in bore and keyway fits standard inch shafts directly
  • Set-screw locking secures the hub without additional clamping hardware
  • Horsepower ratings of 1.3 to 3.6 hp at 100 RPM cover Buna-N, urethane and Hytrel spiders
  • Straight jaw profile ensures simple alignment and easy spider replacement

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the Dayton 29HY58 hub is running correctly after installation?

Verify smooth rotation up to 5,000 RPM without vibration, and ensure the set screw holds the 3/4 in bore securely on the shaft.

What comes with the Dayton 29HY58 hub and what must I purchase separately?

The sintered iron L110 hub with 3/4 in bore, keyway, and set screw is included; a Buna-N, Urethane, or Hytrel spider element is required separately.

Which spider material should I choose for the Dayton 29HY58 hub based on horsepower at 100 RPM?

Select Buna-N for 1.3 hp, Urethane for 2.0 hp, or Hytrel for 3.6 hp at 100 RPM to match your torque requirements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.