We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear LED warning light with dome polycarbonate lens and stud mount

Dayton

Dayton 26ZT69 Clear LED Warning Light Stud Mount

SKU CH-76NC-1K5MR

Clear LED warning light with stud mounting, IP65 rated, 80 flashes per minute, 30,000-hour lamp life

  • Clear LED flashes 80 times per minute for high visibility
  • IP65 rating resists dust and water in harsh conditions
  • Polycarbonate dome lens and housing withstand impacts and weather
  • Operates reliably from -20 °C to 40 °C ambient temperature
  • Stud mounting provides secure, vibration-resistant installation

Clear LED Warning Light

The Dayton 26ZT69 is a clear LED warning light designed for stud mounting on vehicles or equipment. It operates on a 90-240 power source and draws between 0.18 and 0.2 current. The unit carries an IP65 rating and functions in temperatures from -20 to 40 degrees Celsius.

Suitable for permanent safety marking

This light suits installations that require a dome lens made of polycarbonate with a 30,000-hour lamp life. It is not intended for portable or temporary mounting setups, nor for applications needing a coloured lens or a flash pattern other than the fixed 80 flashes per minute.

Stud mount with IP65 rating

The defining specification is the stud mount combined with an IP65-rated polycarbonate housing. This configuration determines whether the light can be secured to the intended surface and withstand the environmental exposure at the installation point.

Highlights

  • Clear LED flashes 80 times per minute for high visibility
  • IP65 rating resists dust and water in harsh conditions
  • Polycarbonate dome lens and housing withstand impacts and weather
  • Operates reliably from -20 °C to 40 °C ambient temperature
  • Stud mounting provides secure, vibration-resistant installation

Specifications

BrandDAYTON

Questions about this item

What voltage range does the 90-240 power source support?

The unit operates on a 90-240 power source, drawing 0.18 to 0.2 current while delivering 4.5 to 12W light output.

What size is the mounting stud on the polycarbonate housing?

The housing uses a mounting stud for installation; no stud diameter or thread specification is provided in the product details.

How do I wire the light to a 90-240 supply without damaging the LED?

Connect the supply leads directly to the fixture terminals; the internal driver handles 90-240 input, but verify polarity before applying power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.