We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red LED warning light with dome lens and stud mount

Dayton

Dayton 26ZT65 Red LED Warning Light Stud Mount

SKU CH-2YR6-EW2KS

Red LED warning light with stud mount, IP65 rated, 80 flashes per minute and 30,000-hour lamp life

  • ColorRed
  • Red LED visibility with 80 flashes per minute
  • Low power draw of 0.18 to 0.2 current for efficiency
  • IP65 rated polycarbonate housing resists dust and water
  • 30,000 hour lamp life reduces replacement frequency
  • Stud mount design enables secure installation on surfaces

Red LED warning light with stud mount

The Dayton 26ZT65 is a red LED warning light designed for facility and traffic safety applications. It mounts via a stud and carries an IP65 rating for dust and water resistance. The unit operates from -20 °C to 40 °C and draws 0.18 to 0.2 A from a wired power source.

Suited for permanent outdoor

This light fits fixed installations that need a compact, dome-style beacon with a polycarbonate housing and lens. It is not intended for portable or magnetic-mount use, nor for applications requiring a different flash pattern or colour.

Flashes at 80 per minute with 30 000-hour LED life

The LED produces 4.5 to 12 W output and is rated for 30 000 hours of operation. At 80 flashes per minute it provides consistent signalling for long-term deployments. The wired power input and fixed stud mount limit flexibility for temporary or frequently relocated setups.

Highlights

  • Red LED visibility with 80 flashes per minute
  • Low power draw of 0.18 to 0.2 current for efficiency
  • IP65 rated polycarbonate housing resists dust and water
  • 30,000 hour lamp life reduces replacement frequency
  • Stud mount design enables secure installation on surfaces

Specifications

ColorRed
BrandDAYTON

Questions about this item

What voltage supply must my vehicle or equipment provide for the 26ZT65 to operate?

The light draws 0.18 to 0.2 amps from a 12 V DC wire feed, so the system must supply 12 volts.

Will the stud-mounted 26ZT65 interfere with an existing dome lens fixture on the same bracket?

Its own dome lens is polycarbonate and the housing is polycarbonate, so it fits the same mounting pattern without clashing with similar fixtures.

How can I confirm the 26ZT65 is flashing at the correct rate after wiring it up?

Count the flashes; the spec is 80 flashes per minute, so you should see roughly 1.3 flashes every second.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.