We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical tower light, red and amber lenses, ABS housing, 56 mm diameter

Dayton

Dayton 26ZT41 Tower Light Assembly Red Yellow 56 mm

SKU CH-311Q-T8DJV

A 56 mm tower light with red and amber LEDs, flashing or steady modes, IP65 rated, CSA and UL certified, operating on 90 to 240V AC

  • Dual-colour LED signals status clearly
  • IP65 rating protects against dust and water jets
  • Wide 90-240 V AC input suits global power
  • 30,000-hour lamp life reduces maintenance
  • CSA and UL listed for safety compliance

Industrial Signal Tower 56 mm

The Dayton 26ZT41 is a two-colour LED tower light built for machine-status indication in factories and process plants. It mounts directly on equipment and operates on any supply from 90 to 240V AC.

Voltage Range 90 to 240V AC

The unit accepts a wide AC input span of 90 to 240 volts, so it can be wired into most industrial control panels without a separate transformer. Supplying a voltage outside this range will damage the internal driver.

Direct Mount With 20 in Cord

A 20-inch flying lead simplifies termination inside a cabinet, and the 56 mm base bolts straight to a flat surface. The polycarbonate lens and ABS housing meet IP65, but the cord grip must be seated fully or moisture can enter the housing.

Highlights

  • Dual-colour LED signals status clearly
  • IP65 rating protects against dust and water jets
  • Wide 90-240 V AC input suits global power
  • 30,000-hour lamp life reduces maintenance
  • CSA and UL listed for safety compliance

Specifications

BrandDAYTON

Questions about this item

What does the 80 flashes per minute rate mean for visibility on a machine?

The light flashes 80 times each minute in flashing mode, providing a rapid visual signal that meets the stated flash rate for tower lights.

How does the 90 to 240V AC input affect installation wiring?

The unit accepts a wide AC range directly, so it can be wired to standard mains supplies without a separate transformer or driver.

What mounting clearance does the 56 mm diameter and 6 11/16 in height require?

The direct-mount base needs a 56 mm cut-out or bracket, and the overall height of 6 11/16 inches must clear any overhead structure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.