Dayton
Dayton 26WA87 Photocontrol Turn-Lock 120-277VAC Blue
A dusk-to-dawn photocontrol with turn-lock mounting for 120-277 VAC circuits, rated to 1,000 watts and operating from -40 to 158 °F
- Automatic dusk-to-dawn operation with 10.0-20.0 foot-candle turn-on
- Wide 120-277 VAC input voltage covers most commercial circuits
- Raintight polycarbonate housing withstands -40 to 158 °F environments
- Turn-lock mounting enables fast, tool-free installation on standard bases
- Handles up to 1,000 W ballast loads at 15.0 A for reliable lighting control
Dayton 26WA87 Photocontrol Turn-Lock
The Dayton 26WA87 is a turn-lock photocontrol designed for outdoor lighting circuits operating between 120 and 277 volts AC. It suits electricians and facility managers who need automatic dusk-to-dawn switching for area lights, signage or parking-lot fixtures.
Thermals noise and power draw
The unit operates reliably from -40 to 158 degrees Fahrenheit inside a raintight polycarbonate housing. It draws negligible control power while switching loads up to 1000 watts, handling 8.3 amps incandescent or 15.0 amps ballast without audible noise or excess heat.
Bundled accessories and software
No accessories, software or mounting hardware are included with the photocontrol. The blue polycarbonate body simply twists into a compatible turn-lock receptacle, so installers must supply the matching socket and wiring to complete the installation.
Highlights
- Automatic dusk-to-dawn operation with 10.0-20.0 foot-candle turn-on
- Wide 120-277 VAC input voltage covers most commercial circuits
- Raintight polycarbonate housing withstands -40 to 158 °F environments
- Turn-lock mounting enables fast, tool-free installation on standard bases
- Handles up to 1,000 W ballast loads at 15.0 A for reliable lighting control
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How do I install the turn-lock photocontrol and what step is often missed?
Twist the unit into the matching receptacle until it locks; the step often missed is confirming the receptacle is wired for 120 to 277V AC before mounting.
What maintenance or replacement will the photocontrol need later?
The sealed polycarbonate housing requires no routine maintenance; replace the entire unit if the SPST contact fails to switch at the 10.0 to 20.0 foot-candle on threshold.
What limit appears first during sustained operation?
The 8.3 A incandescent or 15.0 A ballast current rating will be reached before the -40 to 158 °F temperature range becomes a constraint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
