Dayton
Dayton 24EN84 Off Delay Relay 12V DC DPDT 10A Octal 11 Pin 9s-15min IP20
Off-delay timer relay with 12 V DC coil, DPDT contacts rated 10 A, 9 s to 15 min range, octal 11-pin plug-in, IP20
- Adjustable off-delay timing from 9 seconds to 15 minutes
- DPDT contacts rated 10 A at 240 V AC or 30 V DC
- Plug-in octal base with 11 pins for quick socket mounting
- 12 V DC coil voltage suits low-voltage control circuits
- IP20 enclosed housing protects internal components from solid objects
What this relay is and who it serves
The Dayton 24EN84 is an off-delay time relay designed for control circuits that need a load to stay energised after the trigger signal is removed. It targets engineers, panel builders and maintenance technicians working on 12 V DC systems such as industrial machinery, automotive equipment or custom automation panels.
Installation notes and common pitfalls
The relay uses an 11-pin octal plug-in base, so it mounts directly into a matching socket without soldering. Wiring must follow the DPDT contact arrangement; reversing coil polarity on a DC coil will prevent operation. The IP20 enclosure is finger-safe but not waterproof, so the unit must sit inside a protected cabinet or panel. Potentiometer adjustment ranges from 9 seconds to 15 minutes; setting the dial without a timer often leads to incorrect delay times.
The specification that decides fit
Coil voltage is 12 V DC and the contacts are rated 10 A at 240 V AC or 30 V DC. If your control circuit runs on a different voltage or the load exceeds 10 A, this relay will not work.
Highlights
- Adjustable off-delay timing from 9 seconds to 15 minutes
- DPDT contacts rated 10 A at 240 V AC or 30 V DC
- Plug-in octal base with 11 pins for quick socket mounting
- 12 V DC coil voltage suits low-voltage control circuits
- IP20 enclosed housing protects internal components from solid objects
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How can I verify the relay is timing correctly after installation?
Apply 12V DC to the coil, then remove power; the DPDT contacts should stay closed for the potentiometer setting between 9 sec and 15 min before opening.
What comes with the 24EN84 and what must I source separately?
The relay itself with 11 octal pins is included; an 11-pin octal socket for plug-in mounting and wiring to the 10 A contacts are not supplied.
Which time range should I select for my application?
The single off-delay function is continuously adjustable from 9 sec up to 15 min via the built-in potentiometer; choose the setting that matches your required delay.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
