We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 24C180 half-horsepower capacitor-start belt-drive motor steel frame open drip proof

Dayton

Dayton 24C180 1/2 HP Capacitor-Start Belt Drive Motor 115/208-230V AC

SKU CH-HN06-BHZMZ

A 1/2 HP capacitor-start belt drive motor running at 725 RPM on 115/208-230V AC with a 56H frame and automatic thermal protection

  • typeClosed Base
  • 1/2 HP motor powers demanding fan and blower applications
  • Capacitor-start design delivers strong starting torque for single-phase operation
  • Dual-voltage 115/208-230V AC fits common residential and commercial wiring
  • 56H frame with cradle base mounts at any angle for flexible installation
  • Open drip-proof enclosure with auto thermal protection runs continuously at 40 °C ambient

Dayton 24C180 1/2 HP Capacitor-Start Motor

This Dayton 24C180 is a single-phase capacitor-start motor rated at 1/2 horsepower. It operates on 115/208-230V AC power at 60 Hz. The unit features a 56H frame with cradle-base mounting and an open drip-proof enclosure. It is built for continuous duty in fan and blower applications.

1,725 RPM Nameplate Speed

The motor runs at a fixed 1,725 RPM nameplate speed with a single speed setting. This specific speed determines whether the motor matches the airflow requirements of your existing fan or blower assembly. Verify the required RPM against your equipment specifications before purchase.

Automatic Thermal Protection and Reversible Rotation

Auto-reset thermal protection shuts the motor down if internal temperatures exceed safe limits, then restarts it once cooled. The shaft rotates clockwise or counter-clockwise, allowing installation in either orientation. The steel frame and Class B insulation support operation up to 40 °C ambient temperature.

Highlights

  • 1/2 HP motor powers demanding fan and blower applications
  • Capacitor-start design delivers strong starting torque for single-phase operation
  • Dual-voltage 115/208-230V AC fits common residential and commercial wiring
  • 56H frame with cradle base mounts at any angle for flexible installation
  • Open drip-proof enclosure with auto thermal protection runs continuously at 40 °C ambient

Specifications

BrandDAYTON
typeClosed Base

Questions about this item

What does the 1/2 HP rating mean for actual belt-drive fan performance?

The 1/2 HP motor delivers 725 RPM nameplate speed with a 1.25 service factor, providing continuous-duty torque for belt-driven fans and blowers at 60 Hz operation.

How does the 115/208-230V dual-voltage design work with the 7.7/3.7-3.8 A draw?

At 115 V the motor draws 7.7 A full load; at 208-230 V it draws 3.7-3.8 A. Wire for the voltage you supply and protect the circuit accordingly.

Will the 56H frame with cradle base mount in my existing fan housing?

The 56H frame uses a steel cradle base for all-angle mounting. Verify your housing bolt pattern and shaft clearance match the 56H dimensions before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.