We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 55 mm wide, 2310 mm pitch length, 165 teeth, 14 mm pitch

Dayton

Dayton 2310-14M-55 Curvilinear Timing Belt 55 mm

SKU CH-791S-B0K6C

Neoprene timing belt with 165 teeth, 14 mm pitch and 55 mm width for general industrial power transmission

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • HTD profile with 14 mm pitch ensures precise synchronous drive
  • 165 teeth on 2310 mm pitch length match exact OEM specifications
  • Fiberglass-reinforced neoprene resists stretch from -22 °F to 194 °F
  • Nylon tooth coating reduces wear and noise in continuous operation
  • 55 mm top width delivers high torque capacity for heavy-duty applications

Industrial Timing Belt for Power Transmission

The Dayton 2310-14M-55 is a curvilinear timing belt designed for general industrial applications. It features a neoprene construction with a nylon tooth coating and fiberglass reinforcing cords for durability. The closed-loop design has 165 teeth on one side and a 14 mm pitch for precise synchronous drive.

Thermal Range and Power Handling

This belt operates reliably between -22 Degrees F and 194 Degrees F, covering most factory and plant environments. The neoprene body and fiberglass cords maintain dimensional stability under load without excessive stretch. Black colour helps resist UV degradation in lit areas.

Replaces Worn HTD Belts in Existing Drives

Use this 55 mm top-width belt to replace a stretched or cracked HTD series belt on the same pulley profile. The jump is worth it when tooth shear or backlash degrades timing accuracy on 2310 mm pitch-length drives. It does not suit drives requiring double-sided tooth engagement or a different pitch.

Highlights

  • HTD profile with 14 mm pitch ensures precise synchronous drive
  • 165 teeth on 2310 mm pitch length match exact OEM specifications
  • Fiberglass-reinforced neoprene resists stretch from -22 °F to 194 °F
  • Nylon tooth coating reduces wear and noise in continuous operation
  • 55 mm top width delivers high torque capacity for heavy-duty applications

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How is the 2310-14M-55 timing belt installed and what step is often missed?

Fit the 165-tooth belt over the matching 14 mm pitch pulleys, ensuring the 55 mm width seats fully in the grooves, then tension to the drive specification; the step often missed is verifying tooth engagement on both pulleys before final tensioning.

What maintenance or replacement will the 2310-14M-55 belt need later?

Inspect the neoprene body and nylon tooth coating for cracking, glazing or cord exposure at each scheduled shutdown; replace the closed-loop belt immediately if the fiberglass reinforcement becomes visible or if tooth shear appears.

What limit appears first on the 2310-14M-55 belt under sustained high-load operation?

The 194 °F maximum operating temperature is typically the first limit reached; sustained running above this degrades the neoprene and nylon coating, accelerating tooth wear and cord fatigue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.