Dayton
Dayton 22YK17 30" Oscillating Industrial Cooling Fan 7200/8130 CFM Foldable Pedestal
A 30 inch oscillating industrial fan on a foldable pedestal delivers 7200 to 8130 CFM at two speeds with a 1/4 HP motor
- High airflow up to 8130 CFM on high speed
- Two-speed control delivers 7200 or 8130 CFM as needed
- Oscillating motion spreads air across wider area
- Foldable pedestal allows compact storage and transport
- Quiet 74 dBA operation suits noise-sensitive spaces
Product identity
The Dayton 22YK17 is a 30-inch oscillating industrial cooling fan built for light-duty air circulation in workshops, warehouses or large garages. It delivers 7,200 CFM on low and 8,130 CFM on high with a direct-drive, permanent-split-capacitor motor running at 900 or 1,100 RPM. The foldable pedestal allows the unit to be moved or stored without tools.
Setup checks
Verify that a 120 VAC, single-phase, 60 Hz supply is available and that the circuit can handle 2.8 amps at high speed or 1.9 amps at low speed. The fan draws 280 watts on high and 220 watts on low, so confirm the outlet and breaker rating before plugging it in. Ensure the operating area does not exceed 104 degrees Fahrenheit ambient temperature.
Build and daily use
The steel frame stands 74-1/4 inches tall, 33 inches wide and 32 inches deep at its maximum footprint. Oscillation spreads airflow across a broad zone, reaching 510 feet per minute at 20 feet distance. Sound output measures 74 dBA at full speed. The foldable pedestal reduces storage height and lets the fan be repositioned by one person.
Highlights
- High airflow up to 8130 CFM on high speed
- Two-speed control delivers 7200 or 8130 CFM as needed
- Oscillating motion spreads air across wider area
- Foldable pedestal allows compact storage and transport
- Quiet 74 dBA operation suits noise-sensitive spaces
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Does the 30 inch Dayton 22YK17 ship fully assembled or does the foldable pedestal need separate installation?
The unit arrives as a complete light-duty industrial fan with the foldable pedestal included; no extra mounting hardware or accessories are required.
When should I run the 8130 cfm high setting versus the 7200 cfm low setting on this 120 volt circulator?
Use the high-speed 8130 cfm mode at 1100 rpm for maximum air velocity of 510 feet per minute at 20 feet; switch to the low 7200 cfm mode at 900 rpm when less airflow and lower 220 watt draw are preferred.
What does the 74 dBA sound level mean for a shop that runs the fan continuously at 104 degrees Fahrenheit ambient?
At 74 dBA the fan is about as loud as a busy office, so conversation nearby will be raised but not shouted; the permanent split capacitor motor is rated for continuous operation up to the 104 degree Fahrenheit maximum ambient temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
