Dayton
Dayton 22NZ09 Industrial Power Supply 22mm 240V Green
A raised LED indicator light with a 22mm mounting diameter for 240V AC panels
- Engine BrandDAYTON
- Engine Size22mm Mounting dia
- Raised LED panel light for clear panel status indication
- 22 mm mounting diameter fits standard industrial cut-outs
- 240 V AC supply suits mains-voltage control circuits
- UL listed for verified safety compliance
- 16 mA current draw keeps energy use low
Dayton 22NZ09 Raised Indicator Light
The Dayton 22NZ09 is a raised-panel LED indicator light with a green lens designed for 240V AC industrial circuits. It fits a standard 22mm mounting diameter and uses M3.5 screw terminals for secure wiring. The nylon body and polycarbonate lens suit control panels and machinery where clear visual status is required. Buyers needing a different voltage or lens colour should select another model.
Check panel cutout and wiring before ordering
Verify that the mounting hole is exactly 22mm and that the panel thickness does not exceed 0.039 in. Confirm the supply is 240V AC and that the circuit can provide the 16 mA draw. Ensure M3.5 screw terminals match your wire gauge and that an IP40 rating meets the environmental protection needed. This item is restricted from sale in California due to Proposition 65 chemical warnings.
Thermals noise and power draw in normal use
The LED draws only 16 mA at 240V AC, so heat output is minimal and no audible noise is produced. With an average rated life of 15,000 hours, the indicator runs cool under continuous operation. The IP40-rated enclosure protects against solid objects larger than 1mm while allowing free air convection. No forced cooling or extra power budget is required.
Highlights
- Raised LED panel light for clear panel status indication
- 22 mm mounting diameter fits standard industrial cut-outs
- 240 V AC supply suits mains-voltage control circuits
- UL listed for verified safety compliance
- 16 mA current draw keeps energy use low
Specifications
| Engine Brand | DAYTON |
|---|---|
| Engine Size | 22mm Mounting dia |
Questions about this item
What does the 22mm mounting diameter mean for installation?
The 22mm mounting diameter fits a standard 22mm panel cutout. The panel thickness must not exceed 0.039 in. Connection uses M 3.5 screw terminals.
How do I choose between the available versions?
This listing is for the green LED version rated at 240V AC. Other colours or voltages would be separate items.
What does the 15,000 hour average life mean in daily use?
At 16 mA current draw, the LED is rated for 15,000 hours of continuous operation before brightness drops to half.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
