Dayton
Dayton 20CK13 Sleeved Fire Damper Static Vertical 6x6 Inch
A 6×6 inch vertical static fire damper with a 165 °F fusible link and 1-1/2 hour fire rating for low-pressure HVAC ducts
- 1-1/2 hour fire rating protects ductwork
- 22 ga. galvanized steel resists corrosion
- UL 555 listed for code compliance
- 165 °F fusible link activates automatically
- 110 sq. ft. free area maintains airflow
Product identity
The Dayton 20CK13 is a sleeved fire damper built for vertical mounting in static HVAC systems. Its 22-gauge galvanised steel construction meets UL 555 and NFPA 80, 90A and 101 requirements for 1-1/2-hour fire-rated barriers.
Installation fit
The unit ships with a sleeve and a 165-degree-F fusible link, ready for insertion into a 6-by-6-inch duct opening. The 3-11/16-inch depth and 5-3/4-inch blade dimensions allow it to sit inside standard low-pressure ductwork without protruding into the airstream when open.
Capacity and limits
The damper provides 0.110 square feet of free area, suitable for small-branch duct runs in commercial or residential installations. It is not intended for high-velocity or high-pressure systems, and the fixed fusible-link temperature cannot be adjusted for specialised fire-protection strategies.
Highlights
- 1-1/2 hour fire rating protects ductwork
- 22 ga. galvanized steel resists corrosion
- UL 555 listed for code compliance
- 165 °F fusible link activates automatically
- 110 sq. ft. free area maintains airflow
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How long does the 1-1/2 hour fire rating hold under continuous fire exposure?
The damper is UL 555 listed for a 1-1/2 hour fire rating and will maintain integrity for the full rated period when installed per NFPA 80.
What surface temperature does the galvanized steel sleeve reach during a fire event?
The 22 ga. galvanized steel sleeve and fusible link are tested to UL 555; the link releases at 165°F and the assembly maintains its rating for 1-1/2 hours.
Which retaining angle must I already have to mount this vertical static damper?
The manufacturer recommends retaining angle 2TGG4 for proper installation of this 6 x 6 inch vertical static fire damper.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
