We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton push-button control station three buttons up down stop 25 mm plastic enclosure

Dayton

Dayton 20C799 Push Button Control Station Up/Down/Stop 25 mm

SKU CH-NG90-YG64Q

Three-button momentary control station with Up, Down and Stop legends, 25 mm operators, 10 A at 600 V AC rating, IP40 enclosure and ½–¾ in NPT hub

  • Engine BrandDAYTON
  • Engine Size25 mm
  • Three push buttons provide up, down and stop control in one station
  • 25 mm operator size fits standard industrial cutouts
  • Momentary action on all buttons returns automatically to neutral position
  • Rated 10 A at 600 V AC and 5 A at 24 V DC for reliable switching
  • NEMA 1 and IP40 enclosure protects contacts in indoor environments

Industrial Push-Button Control Station

The Dayton 20C799 is a wall-mounted control station with three momentary push buttons labelled Up, Down and Stop. It is intended for industrial machinery or motor circuits where an operator needs direct manual control at the point of use.

NEMA 1 enclosure with 25 mm operators

The plastic head and IP40 rating suit indoor, dry environments, while the 1/2 in to 3/4 in NPT hub accepts standard conduit fittings. Two black buttons and one red button provide clear visual distinction, and the compact 2.19 in height by 3.69 in width footprint fits tight panel spaces.

10 A AC contact rating for motor circuits

Each operator carries a 2NO/3NC contact block rated at 10 A at 600 V AC and 5 A at 24 V DC under the A600/P600 designation. This capacity determines whether the station can directly switch your load or must drive a contactor instead.

Highlights

  • Three push buttons provide up, down and stop control in one station
  • 25 mm operator size fits standard industrial cutouts
  • Momentary action on all buttons returns automatically to neutral position
  • Rated 10 A at 600 V AC and 5 A at 24 V DC for reliable switching
  • NEMA 1 and IP40 enclosure protects contacts in indoor environments

Specifications

Engine BrandDAYTON
Engine Size25 mm

Questions about this item

What contact rating does the 10 A / 600 V AC A600/P600 designation cap in practice?

The control station is rated for 10 A at 600 V AC and 5 A at 24 V DC under the A600/P600 NEMA designation.

What wall-mount hub size and overall dimensions must the enclosure clear?

It requires a 1/2 in to 3/4 in NPT hub and measures 2.19 in high, 3.69 in wide and 2.06 in deep.

How are the three momentary push buttons wired, and which contact forms do they use?

The Up and Down buttons each provide 2 NO contacts; the red Stop button provides 3 NC contacts, all momentary action with no mechanical interlock.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.