We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 24 inch mobile air circulator on wheels, steel frame, floor standing, non oscillating

Dayton

Dayton 1YNW3 24" Mobile Air Circulator 115V 3600/5800 CFM

SKU CH-551Z-PE26C

A 24-inch industrial mobile air circulator delivering 3600 to 5800 CFM on two speeds with a 1/3 hp motor

  • styleNon-oscillating
  • typeIndustrial
  • Delivers up to 5800 CFM for powerful airflow in large spaces
  • Two-speed motor provides 3600 or 5800 CFM to match cooling needs
  • Direct-drive 1/3 HP motor runs at 850 or 700 RPM for reliable operation
  • Operates at 70 dBA for relatively quiet industrial performance
  • Mobile floor design with 24-inch blades offers flexible placement anywhere

Mobile Industrial Air Circulator

The Dayton 1YNW3 is a 24-inch mobile industrial fan built for floor placement in workshops or warehouses. Its non-oscillating design directs a focused airstream exactly where it is needed. A direct-drive permanent split capacitor motor provides two-speed operation for adjustable airflow. The unit arrives new and ready for standard 120V AC power.

Two-Speed Airflow and Simple Placement

Two settings deliver 3600 CFM on low and 5800 CFM on high, with corresponding air velocities of 210 and 260 feet per minute at 20 feet. The motor runs at 700 RPM on low and 850 RPM on high, drawing 2.6 and 3.9 amps respectively. A standard 120V AC circuit supplies the required 60 Hz single-phase power without special wiring. Steel construction and a floor-mounted base keep the 28-inch high, 34-1/4-inch wide frame stable during operation.

Sustained Operation Within Thermal Limits

The 1/3 hp motor is rated for continuous duty up to a maximum ambient temperature of 104 degrees Fahrenheit. Power consumption settles at 285 watts on low and 450 watts on high during extended runs. Sound output remains at 70 dBA, providing a consistent noise floor for planning workplace communication. Direct drive eliminates belt wear, reducing maintenance intervals during prolonged daily use.

Highlights

  • Delivers up to 5800 CFM for powerful airflow in large spaces
  • Two-speed motor provides 3600 or 5800 CFM to match cooling needs
  • Direct-drive 1/3 HP motor runs at 850 or 700 RPM for reliable operation
  • Operates at 70 dBA for relatively quiet industrial performance
  • Mobile floor design with 24-inch blades offers flexible placement anywhere

Specifications

BrandDayton
styleNon-oscillating
typeIndustrial

Questions about this item

Will the motor overheat if I run it continuously at 5800 CFM in a 104°F room?

The motor is rated for a maximum ambient temperature of 104°F, so continuous operation at high speed is within its design limits.

How loud is 70 dBA when the fan runs all day on the high 850 RPM setting?

At 70 dBA the sound level is comparable to a busy office or dishwasher, constant but not intrusive for industrial areas.

Does the 120V AC plug need a special circuit or just a standard wall outlet?

It draws 3.9 amps on high speed, so a regular 15-amp 120-volt household circuit is sufficient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.