We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1XHV6 submersible sump pump aluminum body 120V AC

Dayton

Dayton 1XHV6 1/3 HP Submersible Sump Pump 120V AC trap

SKU CH-CN3T-TN6FV MPN 1XHV6

Submersible sump pump delivers 1/3 HP at 120V AC with 58 gpm flow at 5 ft head

  • TypeDrain Components
  • 1/3 HP motor delivers 58 gpm at 5 ft head
  • Aluminum body resists corrosion for long service life
  • Engineered polymer impeller handles debris without clogging
  • Buna-N carbon ceramic seal prevents leaks under pressure
  • 120 V AC 60 Hz operation plugs into standard outlet

What this pump does

The Dayton 1XHV6 is a submersible sump pump rated at 1/3 HP for 120V AC, 60 Hz operation drawing 3.8 A. Its aluminum body houses an engineered polymer impeller and a Buna-N, carbon, ceramic shaft seal. It delivers 58 gpm at 5 ft of head, 46 gpm at 10 ft, 31 gpm at 15 ft, and 19 gpm at 20 ft with a maximum head of 29 ft.

Installation checks

Verify you have a 120V AC, 60 Hz circuit capable of supplying 3.8 A and a 1-1/2 inch female discharge connection. No switch is included, so a separate float or pressure switch and wiring must be provided. Confirm the liquid is compatible with aluminum, engineered polymer, Buna-N, carbon, and ceramic materials.

Who should buy and who should not

Suited for basement or crawlspace dewatering where automatic control will be added externally and head requirements stay within 29 ft. Not suited for installations needing an integrated switch, higher flow at greater head, or voltages other than 120V AC. Buyers needing a built-in float switch or different voltage should look elsewhere.

Highlights

  • 1/3 HP motor delivers 58 gpm at 5 ft head
  • Aluminum body resists corrosion for long service life
  • Engineered polymer impeller handles debris without clogging
  • Buna-N carbon ceramic seal prevents leaks under pressure
  • 120 V AC 60 Hz operation plugs into standard outlet

Specifications

TypeDrain Components
BrandDayton
Model1XHV6

Questions about this item

Does the pump come with a float switch or does that need to be purchased separately?

No switch is included with the pump; a separate float switch must be bought and wired to control automatic operation.

Which flow-rate figure should I use to size this pump for my installation?

Match the flow rate to your actual discharge head: 58 gpm at 5 ft, 46 gpm at 10 ft, 31 gpm at 15 ft, 19 gpm at 20 ft, up to a maximum 29 ft shut-off head.

What does the 1/3 HP rating mean for everyday pumping performance?

The 1/3 HP motor draws 3.8 A at 120 V AC and delivers the listed flow rates at each head height, so actual output depends on the vertical lift in your system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.