Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936626BTC
In stock
Dayton
Dayton 1WBV2 Wall Collar 30 in Blade Diameter 34 1/4 in Galvanized Steel
Galvanised steel wall collar fits 30-inch blade fans with a 34 1/4-inch frame and includes four mounting angles and side panels
- typeClosed Base
- Fits 30 in blade diameter fans
- 34 1/4 in overall height matches cut-out
- 18 ga galvanized steel resists corrosion
- 19 1/2 in overall depth for wall thickness
- Includes four mounting angles and side panels
Wall Collar for 30 in Blade Diameter
This Dayton wall collar is a fan accessory designed to fit a 30 in blade diameter and a 35 5/8 in cut-out height and width. It is built from 18 ga galvanized steel for durability. The collar includes four mounting angles and four side panels for installation. Overall dimensions are 34 1/4 in height and width with a 19 1/2 in depth.
Suited for Fixed Wall-Mount Ventilation
The collar suits installers fitting a 30 in blade fan into a prepared wall opening of 35 5/8 in square. It is not for openings that differ from this cut-out size. Buyers who need a different blade diameter or cut-out dimension should look at other accessories. The closed-base type and included hardware support a standard through-wall mount.
Galvanized Steel Construction Under Load
The 18 ga galvanized steel resists corrosion during sustained exposure to outdoor or humid indoor air. Structural rigidity is maintained across the 19 1/2 in depth when the fan operates continuously. The four mounting angles distribute weight evenly to the wall framing. The finish protects the steel without requiring additional coating.
Highlights
- Fits 30 in blade diameter fans
- 34 1/4 in overall height matches cut-out
- 18 ga galvanized steel resists corrosion
- 19 1/2 in overall depth for wall thickness
- Includes four mounting angles and side panels
Specifications
| Brand | Dayton |
|---|---|
| type | Closed Base |
Questions about this item
Which fan blade diameter does this 34 1/4 in wall collar accept?
The collar is made for a 30 in blade diameter fan, matching the 34 1/4 in overall height and width of the housing.
Can the 18 ga galvanized steel collar fit the same 35 5/8 in cut-out as my existing shutter frame?
Yes, the cut-out height and width are both 35 5/8 in, so the collar aligns with that opening.
How do I confirm the 19 1/2 in overall depth sits flush once the four mounting angles and four side panels are bolted in place?
Measure from the wall face to the collar front edge; it should read 19 1/2 in when all supplied hardware is secured.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
