Dayton
Dayton 1VW51 Manual Chain Hoist 1000 lb 10 ft lift
Manual chain hoist lifts 1000 lb up to 10 ft with a Grade 80 alloy steel chain and double disc brake
- Lifts up to 1000 lb with Grade 80 alloy chain
- Double disc Weston brake holds the load securely
- 10 ft lift height suits common workshop tasks
- Hook mount with safety latch installs on existing beams
- Compact steel body measures 11 1/2 in headroom
Manual Chain Hoist 1000 lb
The Dayton 1VW51 is a hand-operated chain hoist rated for a maximum lifting capacity of 1000 lb. It provides 10 ft of vertical lift using a Grade 80 alloy steel chain. The unit mounts via a top hook with a safety latch and includes a double disc Weston-style brake for load holding. It is built for workshops and job sites needing portable overhead lifting.
Upgrade from rope or lever pullers
This hoist replaces basic rope come-alongs or lever pullers when vertical lifting height and controlled lowering are required. The 10 ft lift and hook-mounted design suit tasks where a trolley is unnecessary. The jump is worth it when the load approaches 1000 lb and a positive brake is essential for safety during positioning.
Sustained load behaviour
Under continuous heavy use the double disc brake maintains holding force without fade during repeated lift and lower cycles. The alloy steel chain resists wear over long lifting lengths. The steel body and 11 1/2 in headroom keep the mechanism compact for tight overhead clearances. Operation remains manual, so speed depends entirely on operator effort.
Highlights
- Lifts up to 1000 lb with Grade 80 alloy chain
- Double disc Weston brake holds the load securely
- 10 ft lift height suits common workshop tasks
- Hook mount with safety latch installs on existing beams
- Compact steel body measures 11 1/2 in headroom
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What headroom clearance does the 1VW51 need above the load hook?
The hoist requires 11 1/2 inches of headroom from the load hook to the top of the body.
How is the 1VW51 mounted, and what common step is missed during setup?
It uses a hook mount with no trolley; the step often missed is verifying the support structure can hold the full 1000 lb capacity before hanging the unit.
What chain grade is fitted, and when should it be replaced?
Grade 80 alloy steel chain is fitted; replace it if any link shows wear, stretch, nicks or deformation beyond the manufacturer's discard criteria.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
