We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular steel blower with forward-curved wheel, direct-drive motor, assembled unit

Dayton

Dayton 1TDT5 Rectangular OEM Blower 1020 RPM

SKU CH-N3W4-B3BD7

Direct-drive rectangular OEM blower delivers 965 cfm at free air and 750 cfm at 0.500 in static pressure

  • typeHigh Temperature
  • Delivers 965 cfm at zero static pressure
  • Maintains 950 cfm at 0.100 in SP
  • Provides 873 cfm at 0.250 in SP
  • Outputs 820 cfm at 0.400 in SP
  • Operates at 1020 RPM with direct drive

Dayton 1TDT5 Rectangular OEM Blower

This Dayton 1TDT5 Rectangular OEM Blower delivers 1020 RPM direct-drive airflow for OEM integration. It suits system builders and maintenance teams replacing or specifying a forward-curved wheel blower in industrial or commercial equipment.

Direct-drive assembly requires no belt alignment

The unit ships assembled with a direct-drive package, so installation centres on securing the housing and wiring the single-phase motor. The forward-curved wheel is sensitive to inlet obstructions; restricted intake reduces output and increases motor load.

Confirm static-pressure needs against

Airflow drops from 965 cfm at .000 in SP to 750 cfm at .500 in SP, with intermediate points at 950 cfm (.100), 873 cfm (.250) and 820 cfm (.400). Systems demanding pressure beyond .500 in SP or requiring unmapped points at .125, .375, .750, 1.000 or 1.250 in SP will not match this blower. The product carries a California Proposition 65 warning for cancer and reproductive-harm chemicals.

Highlights

  • Delivers 965 cfm at zero static pressure
  • Maintains 950 cfm at 0.100 in SP
  • Provides 873 cfm at 0.250 in SP
  • Outputs 820 cfm at 0.400 in SP
  • Operates at 1020 RPM with direct drive

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

How can I confirm the blower is delivering the rated 965 cfm at zero static pressure after installation?

Measure the airflow at the outlet with a calibrated anemometer; a reading close to 965 cfm at 0.000 in SP shows the unit is performing to spec.

What components are included with the Dayton 1TDT5 and what must be sourced separately?

The blower ships fully assembled with its direct-drive motor and forward-curved wheel; mounting hardware, ducting, wiring and any speed control are not included.

Which airflow rating should I use to match my system’s static pressure — 0.100 in SP or 0.250 in SP?

Choose the rating that matches your duct resistance: 950 cfm at 0.100 in SP for low-restriction runs, 873 cfm at 0.250 in SP for higher-restriction installations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.