We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square metal blower housing with forward-curved wheel, direct drive motor, grey steel finish

Dayton

Dayton 1TDP5 Square OEM Blower 2860 RPM Direct Drive

SKU CH-859S-BFRGV

Square OEM blower runs at 2860 RPM with direct drive and delivers 131 cfm at zero static pressure

  • typeHigh Temperature
  • Delivers 131 cfm at zero static pressure
  • Maintains 127 cfm at 0.100 in SP
  • Provides 118 cfm at 0.250 in SP
  • Direct-drive motor runs at 2860 RPM
  • Forward-curved wheel design for efficient airflow

High-temperature square OEM blower

The Dayton 1TDP5 is a direct-drive blower built for high-temperature environments. It operates at 2860 RPM with a single-speed motor and forward-curved wheel. The assembled steel housing is designed for OEM integration where consistent airflow under heat is required.

Suited for fixed-resistance ducting.

This unit suits installations needing a constant 131 cfm at free air or 105 cfm at 0.500 in SP static pressure. It does not meet the needs of buyers who require variable airflow, speed regulation, or multi-speed operation for changing load conditions.

131 cfm maximum airflow at zero static pressure

The peak airflow rating of 131 cfm occurs at 0.000 in SP, dropping to 127 cfm at 0.100 in SP and 118 cfm at 0.250 in SP. This single figure defines whether the blower can satisfy the system's flow requirement at its operating resistance.

Highlights

  • Delivers 131 cfm at zero static pressure
  • Maintains 127 cfm at 0.100 in SP
  • Provides 118 cfm at 0.250 in SP
  • Direct-drive motor runs at 2860 RPM
  • Forward-curved wheel design for efficient airflow

Specifications

BrandDayton
typeHigh Temperature

Questions about this item

Will the 2860 RPM blower fit the existing mounting points on my older equipment?

The unit is supplied fully assembled with a 3 3/4 in forward-curved wheel and direct-drive design, so it bolts in place without extra bracketry.

How can I confirm the blower is delivering rated airflow after installation?

Measure static pressure at the outlet; at 0.000 in SP you should see 131 cfm, at 0.100 in SP 127 cfm, at 0.250 in SP 118 cfm, at 0.400 in SP 112 cfm and at 0.500 in SP 105 cfm.

Does the package include a speed controller or wiring harness, or must I buy them separately?

The blower ships assembled as a single-speed 1-phase motor; no drive package, controller or harness is included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.