We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large silver industrial pedestal fan on adjustable stand, 30 inch blades, steel construction

Dayton

Dayton 1RWB5 30" Non-Oscillating Pedestal Fan 120V

SKU CH-N0MF-B3QQE

A 30-inch non-oscillating pedestal fan delivering up to 7250 CFM on two speeds for industrial air circulation

  • styleNon-oscillating
  • typeCommercial
  • 30-inch blade diameter moves up to 7250 CFM for strong industrial airflow
  • Two-speed motor runs at 1100 or 900 RPM to match cooling needs
  • Direct-drive 1/4 hp permanent split capacitor motor draws 2.9 amps on high
  • 77 dBA sound level at 20 ft distance suits workshop environments
  • Pedestal mount with 79-inch overall height positions airflow at working level

Dayton 1RWB5 30-Inch Industrial Pedestal Fan

The Dayton 1RWB5 is a 30-inch non-oscillating pedestal fan built for light-duty industrial air circulation. Its stationary head delivers focused airflow across workstations, warehouses or garage spaces where directional cooling is preferred over sweeping motion. The steel construction suits commercial environments that demand durability.

Thermals Noise and Power Draw

Two-speed operation produces 7,250 CFM on high and 4,650 CFM on low, with corresponding motor speeds of 1,100 and 900 RPM. Sound output measures 77 dBA, while power consumption ranges from 320 watts at high speed to 225 watts at low speed. Operating current draws 2.9 amps on high and 1.9 amps on low at 120 volts AC, 60 Hz. The permanent split capacitor motor is rated for ambient temperatures up to 104 degrees Fahrenheit.

Build Integration and Clearance

The fan stands 79 inches tall with a 33-inch width and outside diameter, requiring a clear floor footprint for its pedestal base. Direct-drive design eliminates belt maintenance, and the standard accessory style allows straightforward mounting on the included pedestal. The unit operates on a single-phase 120-volt supply without special wiring. Buyers needing oscillating coverage or higher static pressure for ducting should consider alternative models.

Highlights

  • 30-inch blade diameter moves up to 7250 CFM for strong industrial airflow
  • Two-speed motor runs at 1100 or 900 RPM to match cooling needs
  • Direct-drive 1/4 hp permanent split capacitor motor draws 2.9 amps on high
  • 77 dBA sound level at 20 ft distance suits workshop environments
  • Pedestal mount with 79-inch overall height positions airflow at working level

Specifications

BrandDayton
styleNon-oscillating
typeCommercial

Questions about this item

How do I assemble the pedestal and mount the 30 in. blade on this 120V Dayton fan?

Bolt the pedestal pole to the base, slide the motor housing onto the pole, tighten the set screws, then attach the 30 in. blade to the motor shaft and secure the retaining nut.

What maintenance will the permanent split capacitor motor and direct-drive system need over time?

Clean the 30 in. blades and motor vents periodically; lubricate the motor bearings if they become noisy, and replace the capacitor only if the fan fails to start.

At 77 dBA and 104 °F max ambient, what limit appears first during continuous high-speed operation?

The 77 dBA sound level is the immediate practical limit; the motor is rated for 104 °F ambient, so heat is unlikely to stop it before noise becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.