We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 200 teeth, 1760 mm length, neoprene with nylon coating

Dayton

Dayton 1LVZ6 Gearbelt HT 200 Teeth 1760 mm

SKU CH-V63N-QYEN6

A neoprene timing belt with 220 teeth, 85 mm width and 1,760 mm pitch length for industrial power transmission

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • HTD timing belt for precise power transmission
  • 220 teeth on 1760 mm pitch length for exact synchronisation
  • 85 mm top width handles high-torque industrial loads
  • Neoprene body with fiberglass cord resists stretch and wear
  • Nylon tooth coating reduces friction from -22 °F to 194 °F

Dayton 1LVZ6 Timing Belt Specifications

This Dayton 1LVZ6 timing belt is a Synchro-Link HTD model designed for general industrial power transmission. It features a neoprene construction with nylon coating and fiberglass reinforcing cords for durability. The closed-loop belt operates reliably between -22 and 194 degrees Fahrenheit. It suits maintenance engineers and procurement specialists sourcing replacement drive components.

Verify Pitch Length and Tooth Count Before Fitting

Confirm your drive requires a pitch length of 1760 mm with a pitch of 8 mm before ordering. The belt carries 220 teeth and a top width of 85 mm, so pulley groove dimensions must match these figures exactly. Check that the application uses a one-sided tooth profile rather than a double-sided design. Ensure the operating environment stays within the stated temperature limits.

Belt Coating and Cord Material Extend Service Life

The nylon tooth coating reduces wear and friction against pulley grooves during continuous operation. Fiberglass reinforcing cords maintain tensile strength and resist stretching under load. These features combine to deliver consistent synchronous motion without lubrication. The black neoprene body resists oil and ozone exposure common in industrial settings.

Highlights

  • HTD timing belt for precise power transmission
  • 220 teeth on 1760 mm pitch length for exact synchronisation
  • 85 mm top width handles high-torque industrial loads
  • Neoprene body with fiberglass cord resists stretch and wear
  • Nylon tooth coating reduces friction from -22 °F to 194 °F

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

Does the Dayton 1LVZ6 timing belt ship as a single closed-loop unit or do I need to buy joining hardware separately?

The belt is a closed-loop Synchro-Link HTD design with 220 teeth and 85 mm top width, so no joining hardware is required.

The listing shows both 200 and 220 teeth; which tooth count matches the 1760 mm pitch length?

The 1760 mm pitch length corresponds to 220 teeth at 8 mm pitch; the 200-tooth figure in the model name does not match this length.

What does the 194 °F maximum temperature mean for continuous operation on a production line?

The neoprene body with fiberglass cords and nylon tooth coating is rated for continuous service up to 194 °F and down to -22 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.