We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 960 mm length, 120 teeth, 50 mm wide

Dayton

Dayton 1LVT4 Gearbelt HT 120 Teeth 960 mm

SKU CH-YPAQ-DDZ69

Neoprene timing belt with 120 teeth, 960 mm pitch length, 50 mm wide, rated from -22 to 194 °F

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Precise 8 mm pitch ensures accurate timing
  • 120 teeth on 960 mm loop match drive specs
  • Neoprene body with fiberglass cord resists stretch
  • Nylon tooth coating cuts friction and wear
  • Rated from -22 to 194 °F for harsh environments

Industrial Timing Belt for Power Transmission

The Dayton 1LVT4 is a Synchro-Link HT timing belt built for general industrial machinery. Its neoprene body with nylon tooth coating and fiberglass reinforcement handles oil, heat and continuous load in fixed-centre drives. The closed-loop design suits conveyors, packaging equipment and automation systems that demand precise synchronous motion without lubrication.

960 mm Pitch Length with 120 Teeth on 8 mm Pitch

This single dimension decides fit: the belt runs exactly 960 mm pitch length with 120 teeth spaced at 8 mm HTD profile. The 50 mm top width matches the pulley groove, and the 194 °F maximum and -22 °F minimum operating temperatures define the thermal window. Verify pulley tooth count and centre distance before ordering; no stretch allowance exists.

Slip Over Pulleys and Tension to Spec

Installation is a simple loop-over onto matched HTD pulleys, then tension to the drive designer's specification using a tension gauge or deflection method. Common errors are twisting the belt during fitment, running on mismatched or worn pulley profiles, and over-tensioning which fractures the fiberglass cords. Keep the belt clean and avoid oil saturation beyond its rated resistance.

Highlights

  • Precise 8 mm pitch ensures accurate timing
  • 120 teeth on 960 mm loop match drive specs
  • Neoprene body with fiberglass cord resists stretch
  • Nylon tooth coating cuts friction and wear
  • Rated from -22 to 194 °F for harsh environments

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How does the 960 mm pitch length translate once the belt is tensioned on a drive?

The 960 mm pitch length is the effective circumference at the cord line; under proper tension the belt runs at that length on matching 8 mm pitch pulleys.

What does the 8 mm HTD pitch limit in terms of pulley selection and torque capacity?

The 8 mm HTD pitch requires pulleys with the same 8 mm tooth spacing and curvilinear profile, which together determine the maximum transmittable torque for the 50 mm width.

What shaft centre distance and flange clearance does the 120-tooth, 50 mm wide closed loop need to fit?

The 960 mm pitch length sets the nominal centre distance for a given pulley pair, while the 50 mm top width demands flanges or guides spaced to accommodate that full belt width.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.