We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized carbon steel Grade 30 coil chain, 3/8 inch links, 60 foot coil

Dayton

Dayton 1DJU5 Grade 30 Chain 3/8 in 60 ft 2650 lb

SKU CH-TMA0-F0W71

Grade 30 carbon-steel coil chain, 60 ft long with a 2,650 lb working load limit and galvanised finish for corrosion resistance

  • Grade 30 strength rated for 2,650 lb working load limit
  • Galvanized carbon steel resists corrosion across extreme temperatures
  • Sixty-foot coil supplies ample length for towing or binding
  • Straight-link design ensures consistent performance without twists
  • Not rated for overhead lifting — use for pulling and conveying only

Grade 30 Carbon-Steel Chain

This Grade 30 carbon-steel chain is supplied in a 60 ft coil with a 3/8 in trade size and a galvanized finish. It carries a working load limit of 2,650 lb and is rated for temperatures from -40 °F to 400 °F. The straight-link coil construction has no hook attached and is marked not for overhead lifting. Buyers needing general-purpose binding, towing or agricultural tie-down will find the length and strength suitable.

Check Compatibility Before Ordering

Verify that the 3/8 in trade size and Grade 30 rating satisfy the load requirements of the intended application. Confirm that the working load limit of 2,650 lb is adequate and that the absence of a hook is acceptable for your connection method. Ensure the operating temperature range of -40 °F to 400 °F covers the environment where the chain will be used. Note the Proposition 65 warning regarding cancer and reproductive-harm chemicals.

How It Fits a Build

The coil delivers 60 ft of straight-link chain that can be cut or joined with compatible 3/8 in fittings to create custom tie-down lengths. Its galvanized carbon-steel construction resists corrosion in outdoor and marine settings while the wide temperature range allows use in cold storage or high-heat areas. Because no hook is included, you supply the end hardware that matches your anchor points. The chain frees you from fixed-length straps and lets you configure each job precisely.

Highlights

  • Grade 30 strength rated for 2,650 lb working load limit
  • Galvanized carbon steel resists corrosion across extreme temperatures
  • Sixty-foot coil supplies ample length for towing or binding
  • Straight-link design ensures consistent performance without twists
  • Not rated for overhead lifting — use for pulling and conveying only

Specifications

BrandDAYTON

Questions about this item

Does the 60 ft coil include a hook or any end fittings?

The 60 ft coil has no hook included. End fittings must be purchased separately for attachment.

When should I choose Grade 30 over a higher grade for a 3/8 in chain?

Choose Grade 30 when the working load limit of 2,650 lb covers the load and lifting is not required.

What does the 2,650 lb working load limit mean when the chain is on a real job?

It is the maximum tension the 60 ft chain can safely carry in straight pull applications; it must never be used for overhead lifting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.