We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton shallow well jet pump, cast-iron body, pressure switch mounted on top

Dayton

Dayton 1D876 Shallow Well Jet Pump 1/2 hp 115/230V

SKU CH-WBEA-32R5C MPN 1D876

Shallow well jet pump delivering 12.9 gpm at 30 psi with 25 ft max suction lift and dual-voltage 115/230V operation

  • TypeDrain Components
  • Delivers 12.9 gpm at 30 PSI from 10 ft lift
  • Dual-voltage 115/230V motor fits standard residential wiring
  • 1/2 hp motor draws 13.0 / 6.5 amps for efficient operation
  • Maximum suction lift of 25 ft handles deeper water sources
  • Pressure switch included for automatic pump control

Product identity

The Dayton 1D876 is a shallow-well jet pump rated at 1/2 horsepower for 115/230V AC supply. It delivers up to 12.9 gallons per minute at 30 PSI from a 10-foot lift and includes the ejector and pressure switch for ready installation.

Suitability

This pump suits homes or light agricultural sites drawing from wells where the water level sits within 25 feet of the surface. Installations that require deeper suction, higher flow at 50 PSI, or a different voltage should look at alternative equipment.

Deciding specification

The maximum suction lift of 25 feet determines whether this unit can reach the water source; if the static water level exceeds that figure the pump will not perform as required.

Highlights

  • Delivers 12.9 gpm at 30 PSI from 10 ft lift
  • Dual-voltage 115/230V motor fits standard residential wiring
  • 1/2 hp motor draws 13.0 / 6.5 amps for efficient operation
  • Maximum suction lift of 25 ft handles deeper water sources
  • Pressure switch included for automatic pump control

Specifications

TypeDrain Components
BrandDayton
Model1D876

Questions about this item

Will the 115/230V motor and 1-1/4 in NPT inlet connect directly to my existing shallow-well piping and household circuit?

The pump runs on 115 or 230 volts AC, draws 13.0 amps at 115V or 6.5 amps at 230V, and has a 1-1/4 in NPT inlet that matches standard shallow-well suction lines.

How can I verify the pump is delivering the rated flow after installation?

At a 10 ft lift the pump should produce 12.9 gpm at 30 psi, 12.2 gpm at 40 psi and 9.2 gpm at 50 psi; measure pressure and flow at the discharge to confirm.

Does the box include the ejector and pressure switch, or must I buy them separately?

The ejector is included and a pressure switch is also supplied, so no separate purchase is needed for those components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.