We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 14 inch galvanized steel exhaust fan with aluminum blades and zinc plated guard

Dayton

Dayton 14 in Exhaust Fan 1066 CFM

SKU CH-7M6A-0JBBQ

Medium-duty direct-drive exhaust fan moves 1066 CFM through a 14-inch aluminum blade at 9.4 sones

  • typeMedium Duty Direct Drive
  • 14 in blade diameter moves 1066 CFM for strong airflow
  • Direct-drive motor cuts maintenance with fewer moving parts
  • Galvanized steel frame resists corrosion in damp spaces
  • 4 sones rating keeps noise at moderate levels
  • 14 1/4 in duct connection fits standard ventilation openings

14 in Direct Drive Exhaust Fan

This Dayton exhaust fan uses a 14 inch aluminium blade on a direct drive motor to move air through a 14 1/4 inch duct. The galvanised steel frame and zinc plated steel guard suit medium duty ventilation in workshops, garages or commercial spaces. It arrives assembled and ready to install.

Sustained airflow at zero static pressure

At 0.000 in SP the fan delivers 1152 cfm with a sound output of 9.4 sones. Direct drive construction removes belt wear so output stays consistent over long runs without tension adjustments or slippage losses. The aluminium blade resists corrosion in humid exhaust streams.

Replaces belt drive or smaller propeller units

Builders upgrading from belt driven models eliminate pulley maintenance and gain a slimmer profile for tight plenums. The jump is worth it when duct runs are short and static pressure stays near zero; ducted systems with significant resistance will need a higher pressure rated fan instead.

Highlights

  • 14 in blade diameter moves 1066 CFM for strong airflow
  • Direct-drive motor cuts maintenance with fewer moving parts
  • Galvanized steel frame resists corrosion in damp spaces
  • 4 sones rating keeps noise at moderate levels
  • 14 1/4 in duct connection fits standard ventilation openings

Specifications

BrandDayton
typeMedium Duty Direct Drive

Questions about this item

How loud is the 9.4 sone rating when this 14 in exhaust fan runs continuously?

At 9.4 sones the unit produces a noticeable but moderate sound level typical for medium-duty direct-drive fans moving high volumes of air.

What ductwork must I already have to install this 14 in exhaust fan?

The fan requires a 14 1/4 in round duct connection; ensure your existing duct matches that diameter for proper fit.

Will the galvanized steel frame and zinc-plated steel guard hold up next to older aluminum ducting?

Yes, the galvanized frame and zinc-plated guard are corrosion-resistant and compatible with standard aluminum duct systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.