We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 3/4 hp capacitor-start/run motor in 56 frame with rigid base

Dayton

Dayton 119156.00 Capacitor-Start/Run Machinery Motor 3/4 hp 115/208-230V 56 Frame 1725 RPM

SKU CH-XQSN-1R37K

A capacitor-start/run motor delivers 3/4 hp at 1725 RPM on 115/208-230V single-phase power

  • weight40.6
  • typeClosed Base
  • 3/4 hp capacitor-start/run motor delivers strong single-phase torque
  • Dual-voltage 115/208-230V AC wiring suits flexible shop power
  • 1725 RPM continuous-duty speed powers pumps, fans and compressors
  • NEMA 56 frame rigid base fits standard mounting patterns
  • 25 service factor handles sustained overload without thermal protection

3/4 hp Capacitor-Start/Run Motor

The Dayton 119156.00 is a single-phase general-purpose motor rated at 3/4 hp with a nameplate speed of 1,725 RPM. It operates on 115/208-230V AC at 60 Hz and fits a standard 56 frame with a rigid base. The capacitor-start/run design provides reliable starting torque for continuous-duty industrial applications.

Suitable for Fixed-Speed Industrial Loads

This motor suits equipment requiring a single speed and continuous operation at a 1.25 service factor. It is usable at 208V and mounts in any angle with clockwise or counter-clockwise rotation. Buyers needing variable speed control, integrated thermal overload protection, or a totally enclosed enclosure for wet environments should consider other designs.

6.6 Amps at 115V with 1.25 Service Factor

At 115V the motor draws 6.6 full-load amps, dropping to 3.5–3.3A on 208-230V. The 1.25 service factor allows temporary overload headroom for demanding starts. Insulation class B limits the maximum ambient temperature to 40°C, so sustained high-temperature or high-altitude operation will reduce available output.

Highlights

  • 3/4 hp capacitor-start/run motor delivers strong single-phase torque
  • Dual-voltage 115/208-230V AC wiring suits flexible shop power
  • 1725 RPM continuous-duty speed powers pumps, fans and compressors
  • NEMA 56 frame rigid base fits standard mounting patterns
  • 25 service factor handles sustained overload without thermal protection

Specifications

BrandDAYTON
weight40.6
typeClosed Base

Questions about this item

What voltage supply and circuit capacity do I need to run the 115/208-230 V motor drawing 6.6 / 3.5-3.3 A?

Wire the motor for either 115 V or 208-230 V single-phase, 60 Hz. At 115 V it pulls 6.6 A full-load; at 208-230 V it pulls 3.5-3.3 A. Provide a branch circuit and protection sized to the chosen voltage per local code.

Can I keep my existing NEMA 56-frame mounting and shaft coupling when swapping to this motor?

Yes. The motor uses a standard NEMA 56 frame with a rigid base and 5/8 in keyed shaft. Bolt pattern, shaft height and keyway match other 56-frame units, so your current mounts and couplings will align.

How do I confirm the motor is delivering its rated 3/4 hp at 1,725 RPM after installation?

Measure line current at the supply voltage; it should sit near 6.6 A at 115 V or 3.5-3.3 A at 208-230 V under full load. Verify shaft speed with a tachometer — 1,725 RPM ± normal slip — and check that the casing temperature stays within the 40 °C ambient design limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.