We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 10 inch galvanized steel exhaust fan with aluminum blades and zinc plated guard

Dayton

Dayton 10 In 730 CFM Exhaust Fan

SKU CH-PE5V-MCNNG

A 10-inch medium-duty direct-drive exhaust fan moving 730 CFM at 9.4 sones with galvanized steel frame and aluminum blades

  • typeMedium Duty Direct Drive
  • Moves 730 CFM for strong exhaust performance
  • Direct drive design reduces mechanical complexity
  • Aluminium blades resist corrosion in damp areas
  • Galvanised steel frame adds structural rigidity
  • Operates at 9.4 sones for moderate noise output

10 Inch Medium Duty Exhaust Fan

The Dayton 10 inch exhaust fan uses a direct-drive motor to deliver 730 CFM airflow for general ventilation. Its galvanized steel frame and aluminum blades resist corrosion in damp environments. A zinc-plated steel guard protects the intake side. The unit arrives fully assembled and ready for duct connection.

Suited for continuous air exchange

This fan fits installations that need steady exhaust at 730 CFM through a 10 inch duct. The 9.4 sone noise level suits utility areas where quiet operation is not critical. Buyers who need speed control, a built-in dehumidistat or lower sound output should consider other models. The direct-drive design eliminates belt maintenance for simpler upkeep.

730 CFM at zero static pressure

Rated airflow reaches 752 CFM at 0.000 in SP, giving 730 CFM under typical free-air conditions. This single figure determines whether the fan can meet the ventilation target for the space. California Proposition 65 warnings apply to chemicals in the product.

Highlights

  • Moves 730 CFM for strong exhaust performance
  • Direct drive design reduces mechanical complexity
  • Aluminium blades resist corrosion in damp areas
  • Galvanised steel frame adds structural rigidity
  • Operates at 9.4 sones for moderate noise output

Specifications

BrandDayton
typeMedium Duty Direct Drive

Questions about this item

Does the 10-inch aluminum blade or the direct-drive motor need periodic lubrication or replacement?

The direct-drive design has no belts or pulleys to service, and the aluminum blade is fixed to the motor shaft, so routine maintenance is limited to keeping the intake guard clear of debris.

At what static pressure does the 730 CFM rating drop off during continuous operation?

The published airflow of 752 cfm is measured at 0.000 in SP; any duct resistance will reduce output, so the practical limit appears as soon as static pressure rises above zero.

How loud is the fan at 9.4 sones when it runs all day in a residential ceiling?

At 9.4 sones the unit produces a noticeable but moderate hum comparable to a busy office, and the galvanized steel frame helps dissipate motor heat during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.