Dayton
Dayton 1/32 in 100 ft 30 lb WLL Stainless Steel Cable
Stainless steel cable, 100 ft long, 1/32 in diameter, 30 lb working load limit
- 304 stainless steel resists corrosion
- 150 lbf breaking strength supports heavy loads
- 30 lb working load limit ensures safe lifting
- 1 x 19 strand construction maintains flexibility
- 100 ft length covers extended reach needs
1/32 in Stainless Steel Cable
This Dayton wire rope is made from 304 stainless steel with a 1 x 19 strand construction. It measures 100 ft in length and has a cable diameter of 1/32 in. The cable is uncoated and unlubricated with plain ends.
30 lb Working Load Limit
The cable offers a working load limit of 30 lb and a breaking strength of 150 lbf. It suits light lifting and pulling tasks where corrosion resistance is required. The IWRC core provides structural stability within this capacity range.
Replaces Thinner or Coated Lines
This wire rope upgrades from smaller diameters or coated cables that lack the same breaking strength. The jump is worth it when a bare 304 stainless construction is needed for direct load contact. It is not suited for applications requiring a larger bend radius or higher load ratings.
Highlights
- 304 stainless steel resists corrosion
- 150 lbf breaking strength supports heavy loads
- 30 lb working load limit ensures safe lifting
- 1 x 19 strand construction maintains flexibility
- 100 ft length covers extended reach needs
Specifications
| Brand | Dayton |
|---|
Questions about this item
Will the 1/32 in diameter cable run smoothly through my existing 1/32 in pulleys?
The 1/32 in overall diameter matches standard 1/32 in pulley grooves, and the unlubricated 1 x 19 strand construction reduces snagging on older hardware.
How can I verify the 304 stainless steel cable is holding its 30 lb working load limit after installation?
Apply a test load up to 30 lb and check for permanent stretch; the 150 lbf breaking strength provides a 5:1 safety margin if no deformation occurs.
Does the 100 ft spool include end fittings or must I buy thimbles and sleeves separately?
The cable ends are plain with no fittings; thimbles, sleeves or other terminations must be purchased separately for lifting use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
