We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/2 hp HVAC motor steel frame horizontal mount

Dayton

Dayton 1/2 hp HVAC motor 825 RPM 120V 5.3A

SKU CH-P77A-AXSVN

Single-phase HVAC motor delivers 1/2 hp at 825 RPM on 120 V AC, drawing 5.3 A with permanent-split-capacitor design for continuous duty

  • 1/2 hp output powers HVAC equipment reliably
  • 825 RPM speed matches original unit specifications
  • 120 V single-phase supply fits standard wiring
  • 3 A full-load current allows proper circuit sizing
  • Continuous duty rating supports non-stop operation

HVAC motor for 120V systems

The Dayton 1/2 hp motor runs at 825 RPM on 120V AC single-phase power, drawing 5.3 A at full load. It uses a permanent split capacitor design rated for continuous duty in horizontal mounting positions. The steel frame and Class B insulation suit standard HVAC replacement needs.

Capacity and voltage limits

At 120V the motor delivers its rated half-horsepower output with a 40 °C maximum ambient temperature. The supplier notes it is not usable at 200V or 208V, so it cannot serve dual-voltage installations. Builders needing higher voltage operation or greater horsepower must select a different unit.

Thermal and electrical behaviour

Class B insulation handles the 40 °C ambient limit during continuous operation at 60 Hz. The permanent split capacitor design avoids a separate starting capacitor, simplifying wiring and reducing component count. Current draw remains at the stated 5.3 A under full-load conditions.

Highlights

  • 1/2 hp output powers HVAC equipment reliably
  • 825 RPM speed matches original unit specifications
  • 120 V single-phase supply fits standard wiring
  • 3 A full-load current allows proper circuit sizing
  • Continuous duty rating supports non-stop operation

Specifications

BrandDAYTON

Questions about this item

Will this 825 RPM motor line up with the mounting holes on my existing HVAC blower housing?

The motor uses a non-standard frame and is designed for horizontal mounting; compare the frame dimensions and bolt pattern with your current housing before installation.

How can I verify the motor is running correctly once wired?

At 120 V AC and 60 Hz the nameplate shows 825 RPM and 5.3 A full-load current; measure voltage, current and shaft speed under load to confirm they match these values.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.