We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DAYCO 17420 V-Belt 42 In .53 In transparent cogged rubber loop

DAYCO

DAYCO 17420 V-Belt 13A1065 42 In .53 In

SKU CH-9932-YVRVF

Cogged V-belt with 42 in outside length and .53 in top width fits industry number 13A1065

  • ColorTransparent
  • Cogged design improves grip and reduces slippage
  • 42 inch outside length fits specified engine pulleys
  • 53 inch top width matches 13A1065 industry standard
  • Dayco 17420 construction delivers reliable power transmission
  • Transparent material allows visual inspection for wear

DAYCO 17420 V-Belt 42 In .53 In

This DAYCO V-Belt carries industry number 13A1065 and suits automotive engines needing a 42 In outside length with a .53 In top width. The cogged design fits standard pulley grooves on compatible vehicles. It is a direct replacement part for maintenance or repair work.

Installation notes for the DAYCO 17420

Route the belt following the engine diagram and tension it to the manufacturer specification. A belt that is too loose will slip and wear quickly; one that is too tight loads bearings and shortens component life. Check alignment and condition of all pulleys before fitting the new belt.

Capacity and headroom of the 13A1065 belt

The 42 In length and .53 In width match the stated industry standard for the intended drive. It transmits the factory-rated accessory loads without stretch under normal service. Engines demanding a longer path or wider section will not accept this part.

Highlights

  • Cogged design improves grip and reduces slippage
  • 42 inch outside length fits specified engine pulleys
  • 53 inch top width matches 13A1065 industry standard
  • Dayco 17420 construction delivers reliable power transmission
  • Transparent material allows visual inspection for wear

Specifications

BrandDAYCO
ColorTransparent

Questions about this item

How do I verify the DAYCO 17420 V-Belt is tensioned correctly after installation?

Check that the belt shows minimal deflection when pressed midway between pulleys and listen for squealing during engine start-up; the cogged design should seat fully in the grooves.

What comes with the DAYCO 17420 V-Belt and what must I source separately?

The package contains the single 42-inch cogged V-Belt with industry number 13A1065; pulleys, tensioners and tools are not included.

Which DAYCO V-Belt matches a 42-inch outside length and 0.53-inch top width?

The 17420 carries industry number 13A1065 and those exact dimensions, so it is the correct choice for that specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.