We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DAYCO 17260 V-Belt 13A0660 26 In .53 In transparent cogged rubber belt

DAYCO

DAYCO 17260 V-Belt 13A0660 26 In .53 In

SKU CH-T2MN-4FA13

Cogged automotive V-belt with 26 inch outside length and .53 inch top width

  • ColorTransparent
  • Cogged design improves grip and reduces slip
  • 26 In outside length fits specified pulley routing
  • .53 In top width matches industry number 13A0660
  • DAYCO 17260 built for automotive engine drive systems
  • New condition ensures full service life from installation

Product Identity

The DAYCO 17260 V-Belt carries industry number 13A0660 and measures 26 inches in outside length with a top width of .53 inches. It is a cogged automotive belt designed for engine accessory drives in passenger cars and light trucks.

Replacement Scope

This belt replaces a worn or cracked original with the same 13A0660 designation and 26 inch length. The upgrade is worthwhile when the old belt shows glazing, fraying or tension loss that causes squeal or accessory slip.

Sustained Operation

The cogged profile reduces bending stress and heat buildup during continuous engine running. It maintains consistent grip on pulleys over long drives without the stretch that degrades smooth V-belts.

Highlights

  • Cogged design improves grip and reduces slip
  • 26 In outside length fits specified pulley routing
  • .53 In top width matches industry number 13A0660
  • DAYCO 17260 built for automotive engine drive systems
  • New condition ensures full service life from installation

Specifications

BrandDAYCO
ColorTransparent

Questions about this item

What pulley groove width matches the 0.53 in top width of this DAYCO 17260 V-Belt?

The belt has a top width of 0.53 in, so it fits pulleys designed for that standard dimension; verify the groove width on your engine before installing.

How do I tension the DAYCO 17260 V-Belt correctly during installation?

Route the cogged belt over the pulleys, then adjust the tensioner or accessory bracket until the belt deflects the recommended amount under thumb pressure; overtightening is the common error.

When should I replace the DAYCO 17260 V-Belt based on wear signs?

Inspect for cracks, glazing, chunking or excessive cord exposure on the cogged surface; replace at the first sign of any of these conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.