We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DAYCO 15260 V-Belt 11A0660 26 In .44 In transparent cogged rubber loop

DAYCO

DAYCO 15260 V-Belt 11A0660 26 In .44 In

SKU CH-SB91-5Z2NE

Cogged automotive V-belt, 26 in outside length and .44 in top width, industry number 11A0660

  • ColorTransparent
  • Cogged design reduces slip on 26 In pulleys
  • 44 In top width fits 11A0660 grooves
  • DAYCO 15260 construction resists heat and wear
  • Industry number 11A0660 ensures correct replacement match
  • Automotive V-Belt rated for standard engine drives

DAYCO 15260 V-Belt Overview

This DAYCO 15260 V-Belt is a new automotive engine component designed for replacement in compatible vehicle systems. It features a cogged construction that helps maintain grip and reduce slippage during operation. The belt carries industry number 11A0660 for straightforward cross-referencing against vehicle service requirements. Mechanics and DIY owners use it to restore proper accessory drive function.

Suitable Applications and Limitations

This belt suits repairs where the specified outside length and top width match the original equipment exactly. It is not for buyers who need a different length, a wider or narrower profile, or a smooth non-cogged design. Vehicles requiring a distinct industry number or a multi-rib serpentine belt should look at another part. Always verify the exact specifications before ordering.

Critical Fitment Specification

The single specification that decides fitment is the 26 In outside length combined with the .44 In top width. These two dimensions must match the original belt precisely for the drive system to tension and track correctly. An incorrect length prevents proper tensioning while a mismatched width causes pulley misalignment and premature wear. Confirm both figures against the vehicle manual or the old belt.

Highlights

  • Cogged design reduces slip on 26 In pulleys
  • 44 In top width fits 11A0660 grooves
  • DAYCO 15260 construction resists heat and wear
  • Industry number 11A0660 ensures correct replacement match
  • Automotive V-Belt rated for standard engine drives

Specifications

BrandDAYCO
ColorTransparent

Questions about this item

How is the DAYCO 15260 V-Belt installed and which step is often done incorrectly?

Route the cogged belt around each pulley following the engine's belt path diagram, then tension it so the 26 inch outside length sits snug without overtightening; the step most often missed is re-checking tension after the first few minutes of running.

What maintenance or replacement will the DAYCO 15260 V-Belt need later?

Inspect the 0.44 inch top width and cogs for cracks, glazing or chunking at every oil change; replace the belt immediately if any damage appears or once the rubber hardens with age.

What limit appears first on the DAYCO 15260 V-Belt under sustained use?

Heat buildup from continuous operation hardens the rubber compound first, causing the cogs to lose grip on the pulleys and leading to slippage before the belt actually stretches or breaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.