DataStor
DataStor Projector Lamp for Epson PowerLite 935W ELPLP64 275W UHE
Genuine compatible replacement lamp module with 275 W UHE bulb and housing delivers 2,000 hours of projection life for Epson PowerLite 935W projectors
- TypeUHE
- Wattage275W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- Genuine UHE 275W bulb matches original brightness
- 2000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Compatible with Epson PowerLite 935W ELPLP64
Replacement lamp for Epson PowerLite 935W
The DataStor lamp module fits the Epson PowerLite 935W projector and ships as a complete housing with a 275W UHE bulb. It is intended for owners who need a direct swap when the original lamp reaches end of life. Installation requires no extra tools or separate bulb handling.
Upgrade from a dim or expired original lamp
This module replaces the ELPLP64 unit when brightness has dropped or the projector warns of lamp failure. The jump is worth it when image quality no longer meets the needs of classroom or meeting-room presentations. A fresh 275W UHE bulb restores rated output without changing projector settings.
Steady output over the rated 2,000 hours
The UHE bulb is manufactured to ISO 9001 standards and tested for ignition, voltage stability and run-time consistency. It maintains usable brightness throughout the rated 2,000-hour life rather than fading quickly after a short burst. Each unit is checked for beam performance and connections before shipping.
Highlights
- Ready-to-install module saves setup time
- Genuine UHE 275W bulb matches original brightness
- 2000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Compatible with Epson PowerLite 935W ELPLP64
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 275W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What housing dimensions does the ELPLP64 module use so it fits the PowerLite 935W?
The ELPLP64 module is a fully assembled bulb-and-housing unit built to the exact mechanical specification of the original Epson lamp for the PowerLite 935W, so it seats directly in the projector's lamp compartment without adapters.
Which steps must I follow to install the ELPLP64 lamp in my PowerLite 935W, and where do people go wrong?
Power off and unplug the projector, let it cool completely, open the lamp cover, loosen the two retaining screws, slide out the old module, insert the new ELPLP64 until it clicks, retighten the screws, close the cover, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.
When will the 275 W UHE bulb in the ELPLP64 need replacement, and what should I order?
The UHE bulb is rated for 2000 hours of typical use; when brightness drops or the projector signals end of life, order another ELPLP64 module (Epson part 64) to restore original performance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



