DataStor
DataStor Projector Lamp for Epson EX7230 ELPLP87 215W 5000 Hrs
Replacement lamp module with a 215 W UHE bulb rated for 5,000 hours, compatible with the EX7230 projector
- TypeUHE
- Wattage215W
- Lamp Life5,000 Hrs.
- Ready to install with pre-assembled housing
- 215 W UHE bulb delivers bright output
- Rated for 5000 hours of projection time
- Compatible with Epson EX7230 and ELPLP87 models
- Manufactured to ISO 9001 quality standards
Replacement lamp for Epson EX7230
The DataStor lamp module fits the Epson EX7230 projector and uses the ELPLP87 housing with a 215W UHE bulb rated for 5000 hours of operation. It arrives fully assembled so the projector is ready to run after a single swap. Buyers who need a different wattage or a bare bulb without housing should look elsewhere.
Upgrade from a dim or expired original
This unit replaces the factory lamp when brightness has faded or the hour counter has reached its limit. The jump is worth it when the projected image looks washed out or the projector warns that the lamp is near end of life. It is not a higher-output alternative for users who want more lumens than the original design provides.
Simple housing swap with quality checks
Installation consists of removing the old module and inserting the new one until it seats firmly; no tools beyond a screwdriver for the access panel are typically required. Each unit is tested to ISO 9001 criteria for ignition, voltage, beam performance and run-time. The most common issue is forgetting to reset the projector's lamp timer after fitting the new module.
Highlights
- Ready to install with pre-assembled housing
- 215 W UHE bulb delivers bright output
- Rated for 5000 hours of projection time
- Compatible with Epson EX7230 and ELPLP87 models
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 215W |
| Lamp Life | 5,000 Hrs. |
Questions about this item
What projector model does the ELPLP87 lamp module fit?
The ELPLP87 module is built for the Epson EX7230 projector and matches the original housing dimensions.
How is the lamp module installed and what step is often missed?
Power off the projector, let it cool, remove the lamp cover, slide out the old module, insert the new one until it clicks, replace the cover, then reset the lamp timer in the menu.
When will the 215W UHE bulb need replacement?
The rated life is 5000 hours; replace the module when brightness drops or the projector warning appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



