DataStor
DataStor Projector Lamp for Epson EB-S52 170W UHE
A replacement lamp module with a 170W UHE bulb rated for 2,000 normal or 3,000 economy hours
- TypeUHE
- Wattage170W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with 170W UHE bulb and housing
- 2,000 hours normal or 3,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Compatible with Epson EB-S52 projectors using ELPLP42
- New replacement lamp from trusted OEM and compatible sources
DataStor Projector Lamp for Epson EB-S52
This replacement lamp module fits the Epson EB-S52 projector and uses a 170W UHE bulb. It arrives as a complete housing assembly ready for direct installation. The lamp delivers 2000 hours of life in normal mode or 3000 hours in economy mode. It is built to ISO9001 quality standards for reliable operation.
Replaces a dimming or failed original lamp
When the existing lamp loses brightness or reaches its rated hours this module restores full output without replacing the entire projector. The jump is worthwhile if the projector is otherwise functional and the lamp timer shows end of life. It is not suited for users who need a higher lumen rating than the original specification provides.
Simple housing swap with no tools required
The lamp slides into the projector after removing the lamp cover and securing the retaining screws. Common issues include forgetting to reset the lamp hour counter in the menu or not seating the connector fully. The module is new and carries a 90 day warranty against defects.
Highlights
- Ready-to-install module with 170W UHE bulb and housing
- 2,000 hours normal or 3,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Compatible with Epson EB-S52 projectors using ELPLP42
- New replacement lamp from trusted OEM and compatible sources
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 170W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Will this lamp module fit the Epson EB-S52 projector without extra brackets?
The lamp is a fully assembled ELPLP42 module with bulb and housing designed for the EB-S52, so it installs directly without additional brackets.
What is the installation step that users most often miss when replacing the ELPLP42 lamp?
After inserting the new module, the lamp-hour counter in the projector menu must be reset to zero, otherwise the replacement warning will persist.
How many hours can I expect before the UHE 170W bulb needs replacement?
The lamp is rated for 2,000 hours in Normal mode and 3,000 hours in Economy mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



