DataStor
DataStor Projector Lamp ELPLP71 UHE 190W for Epson EB 485Wi
Replacement lamp module with a 190W UHE bulb and housing, rated 2000 hours normal or 3000 hours economy
- TypeUHE
- Wattage190W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready for immediate installation with pre-assembled housing
- UHE 190W bulb delivers reliable brightness
- 2000 hours normal use or 3000 hours economy mode
- Built to ISO 9001 quality standards with strict performance checks
- Genuine compatible replacement for Epson EB 485Wi projectors
Compatible Replacement Lamp for Epson EB 485Wi
This DataStor lamp module fits the Epson EB 485Wi projector and uses the ELPLP71 form factor. It arrives as a fully assembled 190W UHE bulb inside its housing, so no separate handling of the bare lamp is required. The unit is new and manufactured to ISO 9001 quality standards.
Suits owners needing a direct swap.
It serves educators or meeting-room managers who want a ready-to-install replacement that restores original brightness without projector modification. Buyers whose projector uses a different lamp code or who require a higher-wattage light source should look elsewhere.
Pre-assembled housing speeds installation
Because the bulb ships already seated in its cage, the maintenance cycle is reduced to opening the projector door, sliding the module in, and resetting the lamp timer. No extra tools, alignment steps, or separate housing purchases are involved.
Highlights
- Ready for immediate installation with pre-assembled housing
- UHE 190W bulb delivers reliable brightness
- 2000 hours normal use or 3000 hours economy mode
- Built to ISO 9001 quality standards with strict performance checks
- Genuine compatible replacement for Epson EB 485Wi projectors
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 190W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the ELPLP71 lamp fit my Epson EB 485Wi projector?
Yes, the ELPLP71 module is built specifically for the Epson EB 485Wi and includes the UHE 190W bulb pre-assembled in its housing for direct installation.
Will my existing ceiling mount and power cable still work after I swap in this lamp?
The lamp change does not affect the mount or power cable; you only replace the lamp module itself, so the projector stays in place and plugged in.
How can I verify the new lamp is running correctly once installed?
Reset the lamp timer in the projector menu, then confirm the display shows 0 hours and the image reaches full brightness without flickering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



