DataStor
DataStor PowerLite 1264 ELPLP87 Projector Lamp 215W UHE 5000 Hrs
A genuine compatible replacement lamp module with a 215 W UHE bulb rated for 5,000 hours, supplied fully assembled for straightforward installation
- TypeUHE
- Wattage215W
- Lamp Life5,000 Hrs.
- Genuine ELPLP87 module fits Epson PowerLite 1264 directly
- 215 W UHE bulb delivers 5000 hours of projection
- ISO 9001 production checks verify beam, ignition and run-time
- Ready-to-install housing eliminates separate bulb handling
- New condition ensures full rated life from first use
Direct Replacement for Epson PowerLite 1264
The DataStor PowerLite 1264 ELPLP87 projector lamp is a new 215W UHE module supplied with bulb and housing fully assembled. It is designed for users who need a ready-to-fit replacement that restores original brightness without additional tools.
Upgrades worn or failed OEM lamps
This lamp replaces an ageing original when image dimming, colour shift or a replacement warning appears on screen. The 5,000-hour rated life makes the change worthwhile for classrooms, meeting rooms or home cinemas that run the projector for several hours each day.
Simple drop-in installation
The pre-assembled housing slides into the projector lamp compartment and locks with the existing latch; no alignment of bare bulbs is required. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after fitting, which leaves the replacement warning active.
Highlights
- Genuine ELPLP87 module fits Epson PowerLite 1264 directly
- 215 W UHE bulb delivers 5000 hours of projection
- ISO 9001 production checks verify beam, ignition and run-time
- Ready-to-install housing eliminates separate bulb handling
- New condition ensures full rated life from first use
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 215W |
| Lamp Life | 5,000 Hrs. |
Questions about this item
Does the ELPLP87 lamp module include the housing so it fits directly into the PowerLite 1264 without extra parts?
Yes, the lamp module is a fully assembled bulb and housing designed to fit the Epson PowerLite 1264 projector for direct installation.
What is the correct procedure to install the ELPLP87 lamp, and what step do users often miss?
Power off and unplug the projector, allow it to cool completely, remove the old lamp module, insert the new ELPLP87 module until it clicks securely, replace the lamp cover, then reset the lamp timer in the projector menu — the timer reset is the step most often forgotten.
After 5000 hours of use, what component of the ELPLP87 lamp will need replacement?
The entire lamp module, including the 215W UHE bulb and its housing, will need replacement once the rated 5000-hour lamp life is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



