We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DataStor H391A projector lamp module with housing

DataStor

DataStor H391A UHE 200W 4000 Hrs Projector Lamp

SKU CH-164B-EFRCE

Genuine compatible replacement module with a 200 W UHE bulb and housing, rated for 4,000 hours

  • TypeUHE
  • Wattage200W
  • Lamp Life4,000 Hrs.
  • Genuine replacement module fits Epson ELPLP58 projectors
  • UHE 200W bulb delivers 4000-hour rated lamp life
  • Fully assembled housing enables quick tool-free installation
  • Manufactured under ISO 9001 quality controls
  • Backed by 90-day warranty and 30-day return window

Genuine compatible Epson H391A projector lamp

The DataStor H391A module delivers a new UHE 200W bulb inside a ready-to-install housing that matches Epson model ELPLP58. It is built for owners of compatible Epson projectors who need a direct replacement without separate bulb handling.

UHE 200W bulb rated for 4000 hours

The ultra-high-efficiency lamp runs at 200 watts and is rated for up to 4000 hours of typical operation. Standard UHE thermal characteristics apply, so normal fan noise and power draw remain consistent with the projector’s original design.

Pre-assembled housing with ISO 9001 quality checks

Each unit ships as a complete bulb-and-housing assembly manufactured to ISO 9001 standards and tested for beam performance, ignition, voltage, connections and run-time. The integrated housing eliminates alignment steps, allowing a straightforward swap during routine maintenance.

Highlights

  • Genuine replacement module fits Epson ELPLP58 projectors
  • UHE 200W bulb delivers 4000-hour rated lamp life
  • Fully assembled housing enables quick tool-free installation
  • Manufactured under ISO 9001 quality controls
  • Backed by 90-day warranty and 30-day return window

Specifications

BrandEPSON
TypeUHE
Wattage200W
Lamp Life4,000 Hrs.

Questions about this item

How do I install the ELPLP58 lamp module in my Epson projector?

Power off and unplug the projector, let it cool completely, remove the lamp cover screw, slide out the old module, insert the new H391A assembly until it clicks, replace the cover screw, then reset the lamp timer in the menu.

When will the 200W UHE bulb need replacement?

The lamp is rated for 4,000 hours of typical use; after that brightness drops noticeably and the projector will prompt for a new module.

What limits continuous operation of the 200W lamp?

Thermal protection will shut the projector down if the housing overheats during extended sessions, so allow proper ventilation and clean the air filter regularly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.