We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DataStor H387C 200W UHE projector lamp module with housing

DataStor

DataStor H387C 200W UHE projector lamp

SKU CH-B43V-AJD3R

A replacement projector lamp module with a 200 W UHE bulb and housing, rated for 5,000 hours normal or 6,000 hours economy use

  • TypeUHE
  • Wattage200W
  • Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
  • Genuine compatible replacement fits Epson projectors directly
  • Ready-to-install module includes 200W UHE bulb and housing
  • Long-life lamp delivers 5000 hours normal or 6000 hours economy
  • ISO 9001 manufacturing ensures consistent beam performance and ignition
  • Quality-checked for voltage, appearance, connections and run-time

Compatible Epson H387C lamp

The DataStor H387C is a replacement projector lamp module built for Epson projectors that use the ELPLP60 lamp type. It arrives as a fully assembled 200 W UHE bulb inside its housing, so the unit is ready to fit without extra assembly. The lamp is rated for 5,000 hours in normal mode and 6,000 hours in economy mode. It is manufactured to ISO 9001 standards and supplied new.

Straightforward housing swap

Installation consists of removing the old lamp housing and inserting the complete replacement module, a process designed to be quick and tool-free for most Epson models. Because the bulb comes pre-mounted in the housing, there is no need to handle a bare lamp or align a separate cage. The main risk is forgetting to reset the projector's lamp-hour counter after fitting the new unit, which can leave the replacement timer inaccurate.

For ELPLP60 projector owners

This lamp suits anyone whose Epson projector specifies the ELPLP60 or H387C lamp code and who wants a direct-fit replacement with a pre-assembled housing. It is not intended for projectors that require a different lamp designation, a different wattage, or a bare-bulb installation. Buyers needing a lamp for another Epson series or a different manufacturer should verify the correct part number before ordering.

Highlights

  • Genuine compatible replacement fits Epson projectors directly
  • Ready-to-install module includes 200W UHE bulb and housing
  • Long-life lamp delivers 5000 hours normal or 6000 hours economy
  • ISO 9001 manufacturing ensures consistent beam performance and ignition
  • Quality-checked for voltage, appearance, connections and run-time

Specifications

BrandEPSON
TypeUHE
Wattage200W
Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.

Questions about this item

How can I verify the 200 W UHE lamp is performing correctly after installation?

Check the projector menu for lamp hours; it should start near zero and the image should reach full brightness without flickering, indicating the 200 W UHE module is igniting properly.

What components are included with the H387C lamp and what must be purchased separately?

The module arrives as a fully assembled bulb and housing (ELPLP60) ready to install; no extra parts are required for replacement.

Which version of the H387C lamp should I choose among the OEM and compatible options?

All four versions — three OEM sources and one compatible — meet ISO 9001 standards and are tested for beam performance, ignition, voltage and run-time, so any will work reliably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.