DataStor
DataStor H346A OEM Compatible Projector Lamp 275W UHE 2000/3000 Hrs
A replacement lamp module with a 275 W UHE bulb rated for 2,000 to 3,000 hours
- TypeUHE
- Wattage275W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- OEM-compatible module with Ushio UHE 275W bulb for reliable brightness
- Ready-to-install housing eliminates assembly steps and saves time
- 2000 hours normal or 3000 hours economy lamp life extends replacement intervals
- Manufactured to ISO 9001 quality standards for consistent performance
- Supplied new as direct replacement for Epson ELPLP62 projectors
Ready-to-install lamp module
The DataStor H346A is a new projector lamp module that pairs a 275 W Ushio UHE bulb with a complete housing. It matches Epson part number ELPLP62 and arrives fully assembled for immediate installation in compatible Epson projectors.
Rated 2000 to 3000 hours
The lamp delivers 2000 hours in normal mode and up to 3000 hours in economy mode. Replacing an older unit restores original brightness and colour balance when the existing lamp has reached or passed its rated service life.
For Epson projector owners
This module suits owners of Epson projectors that specify the H346A or ELPLP62 lamp. It is not intended for other projector brands, for bare-bulb replacements without housing, or for applications that demand a different wattage or lamp technology.
Highlights
- OEM-compatible module with Ushio UHE 275W bulb for reliable brightness
- Ready-to-install housing eliminates assembly steps and saves time
- 2000 hours normal or 3000 hours economy lamp life extends replacement intervals
- Manufactured to ISO 9001 quality standards for consistent performance
- Supplied new as direct replacement for Epson ELPLP62 projectors
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 275W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Epson projectors accept the H346A lamp module with the ELPLP62 model number?
The H346A lamp module is built to the ELPLP62 specification and fits the Epson projectors that list ELPLP62 as their replacement lamp part number.
What is the correct sequence for installing the H346A lamp module and resetting the projector's lamp timer?
Power off and unplug the projector, allow it to cool, remove the lamp cover, loosen the securing screws, pull out the old module, insert the new H346A module, tighten the screws, replace the cover, then reset the lamp timer in the projector menu so the 2000 or 3000 hour counter starts from zero.
When should I replace the Ushio 275W UHE bulb inside the H346A housing based on the rated lamp life?
Plan replacement after approximately 2000 hours in normal mode or 3000 hours in economy mode, or sooner if brightness drops noticeably or the projector indicates end of lamp life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



