DataStor
DataStor H268C Projector Lamp 170W UHE 3000/4000 Hrs
Genuine compatible replacement lamp with 170 W UHE bulb and housing, rated 3,000 hours normal or 4,000 hours economy
- TypeUHE
- Wattage170W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- 170W UHE bulb delivers bright projection
- Lamp life up to 4000 hours in Economy mode
- Ready-to-install module with housing included
- Manufactured to ISO 9001 quality standards
- Compatible with Epson ELPLP48 projectors
Genuine Compatible Epson H268C Lamp
This DataStor H268C module replaces the Epson ELPLP48 lamp in compatible projectors. It arrives as a fully assembled 170 W UHE bulb inside its housing, so no separate handling of the bare lamp is required. The unit is manufactured to ISO 9001 quality standards and ships new.
Pre-assembled housing for tool-free swap
Because the bulb is already seated in the projector-specific cage, installation consists of removing the old module and sliding this one into place. The UHE technology delivers consistent brightness across the rated 3,000 hours in normal mode or 4,000 hours in economy mode. A 90-day warranty covers early-life failures.
Verify ELPLP48 cross-reference before ordering
Confirm that your projector lists ELPLP48 or H268C as the correct replacement part number. Several OEM and compatible versions exist, so match the exact model to avoid fitment issues. Buyers needing a bare bulb without the housing or a different wattage should look elsewhere.
Highlights
- 170W UHE bulb delivers bright projection
- Lamp life up to 4000 hours in Economy mode
- Ready-to-install module with housing included
- Manufactured to ISO 9001 quality standards
- Compatible with Epson ELPLP48 projectors
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 170W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Does the H268C lamp use the ELPLP48 interface?
Yes, the H268C corresponds to the Epson ELPLP48 module, so it matches the projector's lamp slot exactly.
What physical parts come with the lamp module?
The unit ships as a fully assembled 170W UHE bulb inside its housing, ready to slide into the projector without extra assembly.
How is the lamp installed, and what step is often missed?
Power off and unplug the projector, let it cool, remove the lamp cover, swap the module, replace the cover, then reset the lamp timer in the menu so the hour counter restarts correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



