We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New projector lamp module with UHE 200W bulb in housing

DataStor

DataStor Epson PowerLite 710HD UHE 200W 2000Hr Projector Lamp

SKU CH-0VEM-3MK5M

Genuine compatible replacement lamp with 200 W UHE bulb rated for 2,000 hours, supplied fully assembled for easy installation

  • TypeUHE
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Genuine compatible ELPLP67 module installs instantly
  • UHE 200W bulb delivers 2000-hour rated life
  • ISO 9001 manufacturing ensures consistent beam performance
  • Each unit tested for ignition voltage and run-time
  • Ready-to-fit housing eliminates separate bulb handling

Ready-to-install UHE lamp module

This DataStor replacement module fits the Epson PowerLite 710HD projector and arrives with the 200W UHE bulb already seated in its housing. The assembly matches the ELPLP67 form factor so no separate bulb handling is required during installation.

ISO9001 manufacturing and 2000-hour rating

Every unit is produced to ISO9001 quality standards and tested for beam performance, ignition voltage, connections and run-time before shipping. The 200W UHE lamp is rated for 2000 hours of typical use.

Verify ELPLP67 compatibility before ordering

Confirm that your projector uses the ELPLP67 lamp code; other PowerLite models may require a different module. The package contains only the lamp assembly — no tools or additional hardware are included.

Highlights

  • Genuine compatible ELPLP67 module installs instantly
  • UHE 200W bulb delivers 2000-hour rated life
  • ISO 9001 manufacturing ensures consistent beam performance
  • Each unit tested for ignition voltage and run-time
  • Ready-to-fit housing eliminates separate bulb handling

Specifications

BrandEPSON
TypeUHE
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

What lamp interface does the ELPLP67 module use, and what wattage does it cap at?

The ELPLP67 module uses the projector's proprietary lamp connector and is capped at 200W by the UHE bulb design.

What physical clearance does the ELPLP67 housing need to fit inside the PowerLite 710HD?

The ELPLP67 housing is built to the exact chassis dimensions of the PowerLite 710HD, so it seats directly in the lamp compartment without adapters.

How is the ELPLP67 module installed, and which step do users often miss?

Power off and cool the projector, open the lamp cover, release the securing screws, swap the module, re-tighten the screws, close the cover, then reset the lamp-hour counter in the menu.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.