DataStor
DataStor Epson PowerLite 1750W Compatible Projector Lamp 230W 2000Hr
A ready-to-install replacement lamp module with a 230 W UHE bulb rated for 2,000 hours of use
- TypeUHE
- Wattage230W
- Lamp Life2,000 Hrs.
- Ready-to-install module with bulb and housing
- 230W UHE lamp delivers 2000 hours runtime
- Compatible with Epson PowerLite 1750W projectors
- Manufactured to ISO 9001 quality standards
- ELPLP65 model fits directly without modification
Ready-to-install replacement lamp
The DataStor module fits the Epson PowerLite 1750W projector and ships as a complete housing with a UHE 230W bulb already seated. No separate bulb handling is required, so maintenance downtime stays minimal. It serves schools, offices and home users who need a direct swap without tools.
Rated output and service interval
The 230W UHE lamp delivers its specified brightness for 2000 hours before output drops to a level that demands replacement. Classrooms running daily lessons will reach that limit faster than occasional home-cinema use. The fixed wattage means the projector’s cooling and power circuits see no change from the original design.
Quality-assured supply options
Depending on stock, the unit may arrive as an OEM lamp from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita, or as a compatible built with genuine OEM parts. Every version is produced under ISO9001 controls and tested for beam performance, ignition voltage, connections and run-time. Buyers who require the original manufacturer’s exact part number should verify availability before ordering.
Highlights
- Ready-to-install module with bulb and housing
- 230W UHE lamp delivers 2000 hours runtime
- Compatible with Epson PowerLite 1750W projectors
- Manufactured to ISO 9001 quality standards
- ELPLP65 model fits directly without modification
Specifications
| Brand | EPSON |
|---|---|
| Type | UHE |
| Wattage | 230W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Will the ELPLP65 lamp module fit my older PowerLite 1750W projector without any adapter?
The ELPLP65 module is built as a direct replacement for the PowerLite 1750W, so it installs into the existing lamp compartment with no extra hardware required.
How can I verify the 230W UHE bulb is performing correctly after installation?
Reset the lamp-hour counter in the projector menu, then confirm the new module reports zero hours and the image reaches full brightness within the normal warm-up period.
Does the package include only the bare bulb or the complete housing, and do I need a separate filter?
The unit ships as a fully assembled bulb-and-housing module ready to install; no separate filter is included or required for the lamp change.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



